"Calls" menu

Материал из База знаний VINTEO
Версия от 14:35, 2 сентября 2024; Alina (обсуждение | вклад) (→‎All contacts)
(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)
GUI Terminal 12

New call

Entering a number

Page with input module [Appendix A]. Enter a number for an outgoing call. The entered number will be saved until you exit the menu.

Outgoing call

Field for starting an outgoing call with the OK control button (19). The button is active only after entering and saving the number.

Protocol

Page for the choice of protocol for outgoing calls. Default is “Auto”.

Speed

Page for speed selection for outgoing calls. Default is “Auto”.

Contacts

All contacts

The list of all created contacts with the ability to filter.

GUI Terminal 13

For the managing of any contact:

  • move focus to the required contact;
  • press the OK control button (19);
  • select an action by moving the focus and pressing the OK control button (19) on the required field:
    • “Video call” – button for the start an outgoing video call;
    • “Audio call” – button for the start an outgoing audio call;
    • “Edit” – the button for going editing (similarly to “New contact” button;
    • "Delete" – the button for the deletion of the selected contact.

The status on the contact page shows the presence status of the Vinteo video terminal added as a contact as part of registration on one video conferencing server:

  • gray - not defined; default status;
  • yellow - the terminal is turned on but is in a call;
  • red - the terminal is turned on but "Do not disturb" mode is activated;
  • green - the terminal is turned on and available for calls.

The presence status is also displayed before each line:

  • on the “All contacts” page;
  • on the "History" page;
  • in “Call history” on the main page.
GUI Terminal 14

Search for a contact using a filter:

  1. move focus to the search bar;
  2. press the control button OK (19) – the page with an input module will open [Appendix А];
  3. enter the number in the line to search among created contacts;
  4. Click “Save” to select contacts by the entered string:
  • if the field does not contain any values then the search for contacts is not carried out; all saved contacts are displayed.
GUI Terminal 15

New contact (pages)

Creating a new contact consists of three steps:

  1. Enter a contact name. Page with input module [Appendix А]. An empty field will not allow you to proceed to the next step.
  2. Entering ID contact. Page with input module [Appendix А]. An empty field will not allow you to proceed to the next step.
  3. Selecting a contact protocol. After saving the third step a new contact will appear.
GUI Terminal 16

History

You can make an outgoing call to any contact from the history. Move the focus to it and press the “Call” button (11). After making an outgoing call from the history – a new call record will appear only after refreshing the page (after re-entering the page).

All

The page with a list of all calls (incoming, outgoing, missed).

Incoming

The page with a list of incoming calls.

Outgoing

The page with a list of outgoing calls.

Missed

The page with a list of missed calls.

GUI Terminal 17