"System settings" menu

Network

Configurations with one network interface and with two network interfaces are possible.

IPv4

IPv4 settings “Turn on” checkbox activates the IPv4 protocol (if it disabled the protocol is unavailable) with access to the settings:

• DHCP is the checkbox for enabling or disabling the dynamic host configuration protocol.

If the checkbox is enabled the network device automatically receives an IP address and other parameters from the DHCP server; manual settings are not available. If the checkbox is disabled IPv4 protocol settings are available:

• • "IP address": the page with the input module [Appendix A] will open;
  • "Subnet mask": the page with the input module [Appendix A] will open;
  • "Gateway": the page with the input module [Appendix A] will open;
• "DNS server": the page with the input module [Appendix A] will open;