"Calls" menu

New call

Entering a number

Page with input module [Appendix A]. Enter a number for an outgoing call. The entered number will be saved until you exit the menu.

Outgoing call

Field for starting an outgoing call with the OK control button (19). The button is active only after entering and saving the number.

Protocol

Page for the choice of protocol for outgoing calls. Default is “Auto”.

Speed

Page for speed selection for outgoing calls. Default is “Auto”.

Contacts

All contacts

The list of all created contacts with the ability to filter.

For the managing of any contact:

• move focus to the required contact;
• press the OK control button (19);
• select an action by moving the focus and pressing the OK control button (19) on the required field:
  • “Video call” – button for the start an outgoing video call;
  • “Audio call” – button for the start an outgoing audio call;
  • “Edit” – the button for going editing (similarly to “New contact” button;
  • "Delete" – the button for the deletion of the selected contact.

The status on the contact page shows the presence status of the Vinteo video terminal added as a contact as part of registration on one video conferencing server:

• gray - not defined; default status;
• yellow - the terminal is turned on but is in a call;
• red - the terminal is turned on but "Do not disturb" mode is activated;
• green - the terminal is turned on and available for calls.

The presence status is also displayed before each line:

• on the “All contacts” page;
• on the "History" page;
• in “Call history” on the main page.

Search for a contact using a filter:

1. move focus to the search bar;
2. press the control button OK (19) – the page with an input module will open [Appendix А];
3. enter the number in the line to search among created contacts;
4. Click “Save” to select contacts by the entered string:

• if the field does not contain any values then the search for contacts is not carried out; all saved contacts are displayed.