Connection to SIP PBX

Материал из База знаний VINTEO
Версия от 16:54, 8 октября 2024; Alina (обсуждение | вклад) (Новая страница: «When connecting to a SIP PBX, two scenarios are usually used: = Scenario #1 = A unified numbering plan is configured on the VINTEO server and the PBX, i.e., conf...»)
(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)

When connecting to a SIP PBX, two scenarios are usually used:

Scenario #1

A unified numbering plan is configured on the VINTEO server and the PBX, i.e., conference numbers and user numbers on VINTEO do not intersect with user numbers on the PBX. A trunk without registration is set up between the VINTEO server and the PBX. In this case, PBX users can call the number of a specific conference, and if they are added there as participants (as Loop users) or the conference is open, they can enter it without entering a PIN code. When calling PBX users from VINTEO, they will see the number of the conference from which they are called.

It is necessary to create a SIP-type gateway. "System" - "Gateways" - "Add Gateway" and enter the following on the "Basics" tab:

  • Gateway name;
  • PBX IP address;
  • Allow incoming calls from the PBX.