VINTEO terminal updates

Release 2.8.0

New and updated features

• Added new menu options to confirm turning off, reloading and resetting the terminal
• Added display of used licenses in web interface

Bugfixes

• Fixed localization issues in GUI
• Fixed flickering of video in the call when turning off the second screen
• Fixed sending requests for SIP-registration via TCP/TLS
• Fixed displaying registration status when resetting the services
• Fixed working with NDI cameras
• Fixed focus shifting in network settings
• Fixed camera image display when going from call menu to main page
• Fixed presentation freeze when changing source of presentation when calling to NDI camera
• Fixed background when ending a call and going to device control menu
• Fixed video display when having two roles coming from one camera when incoming presentation is interrupted

Release 2.6.0

New and updated features

• Reworked loading and starting video terminal services
• Interface for incoming and outgoing calls has been redesigned (during outgoing and incoming calls, all active calls to the device are visible)
• When calling a number from the web interface and the video terminal console, the screen now displays the dialing process (with the ability to cancel the call from the remote control)
• Added support for dialing via SIP (TCP), SIP (TLS)
• Added switching in a call between displayed video streams from the remote control (Backspace) when using one screen and new display modes
• Added selection of presentation source in a call if, in addition to the presentation camera, there is an active Vinteo Screencast registration
• Remote control has been reworked
• In GUI settings, ability to specify the auto-response time has been added
• Interface of the broadcast section has been redesigned
• When incoming calls arrive, the broadcast is now paused rather than closed
• PTZ camera control has been redesigned
• Call history reworked
• An option to enable encryption on H.323 connections (H.323 Crypto) has been added to the terminal codec settings
• The ability to specify a port and enable encryption has been added to the SIP and H.323 registration settings, and the TLS transport protocol has been added to the SIP settings
• In a call, participant's name now appears as the contact's name in the participants list
• When calling via host and DNS SRV, the dialed number is now displayed as the participant number, and not the IP to which they connected
• Interaction with VINTEO microphones has been reworked
• Added dialing by pressing the call key when entering a number in the contacts section
• Reworked turning the device on and off
• Added the ability to assign multiple roles to one camera

Bugfixes

• Fixed time tracking in a call for all participants
• Fixed call cancellation if host was specified as the number
• Fixed reset of monitor settings after installing video terminal updates
• Fixed display of video stream previews in PTZ control mode during a call
• Fixed screen flickering when presenting with Vinteo Screencast
• Call interface fixes
• Fixed interface for setting the speed of network interfaces
• Fixed video display in presentation mode if the assigned presentation camera was previously disconnected and connected back
• Fixed presentation status display if Vinteo Screencast is used as a source
• Fixed slow startup of the video terminal when using DHCP
• Fixed deleting characters in the number input field in the call menu
• Fixed automatic resolution selection when specifying a specific call speed
• Fixed dialing in auto mode (protocol) from the call menu
• Fixed resetting audio settings when turning on the video terminal
• Fixed swapping of network interfaces when turning on the video terminal