Checking network bandwidth using iPerf3

iPerf3 is the console utility. You can measure with its help the maximum network throughput between the videoconferencing server and the client or conduct load testing of the communication channel to determine the level of losses. Before starting testing you need to run iPerf on the server. Special patch was developed for this.

Installing the patch on the server

1. in the “System” server section go to the “Update” subsection;

2. go to the “Settings” tab and by clicking the file selection button specify the path to the file with the patch. To receive the patch you must contact Vinteo technical support;

3. click the “Download” button. the message will appear: “Attention! The configuration downloaded successfully and installed. The system will start within 5 minutes”;