Procedure for installing and launching GPU accelerators on Rikor server motherboards based on Intel Xeon Scalable CPU: различия между версиями

Материал из База знаний VINTEO
(Новая страница: «= Preface = This manual has been tested for the following types and families of GPU accelerators: * Nvidia Tesla T4 – simultaneous operation of 3 accelerators...»)
 
Строка 4: Строка 4:
 
* Nvidia Tesla T4 – simultaneous operation of 3 accelerators on the motherboard;
 
* Nvidia Tesla T4 – simultaneous operation of 3 accelerators on the motherboard;
 
* Nvidia Quadro P620 – simultaneous operation of 4 accelerators on the motherboard.
 
* Nvidia Quadro P620 – simultaneous operation of 4 accelerators on the motherboard.
 +
 +
= Procedure for launching graphics accelerators =
 +
 +
'''Nvidia Tesla T4'''
 +
 +
1. Remove power from the server;
 +
 +
2. Install graphics accelerators in the PCIe x16 slots of the motherboard (x8 with the ability to install x16 expansion cards in them);
 +
 +
3. Apply power to the server;
 +
 +
4. Wait for the image to appear on the screen. Hold down the "ESC" key and wait to enter the BIOS menu;
 +
 +
5. Go to Setup Utility -> Advance -> Socket Configuration -> Common RefCode Configuration;
 +
 +
6. Make settings as shown below; the values ​​of the first three functions are required and the rest are default:
 +
{| class="wikitable"
 +
|-
 +
!  !! '''Common RefCode Configuration'''
 +
|-
 +
| 1 || '''MMCFG''' || '''''512M'''''
 +
|-
 +
| 2 || '''MMIO High Base''' || '''''56T'''''
 +
|-
 +
| 3 || '''MMIO High Granularity Size''' || '''''1024G'''''
 +
|-
 +
| 4 || Isoc Mode || Auto
 +
|-
 +
| 5 || Numa || Enabled
 +
|-
 +
| 6 || Publish SRAT || Enabled
 +
|-
 +
| 7 || SRAT Memory Hot Plug || Disabled
 +
|-
 +
| 8 || SRAT CPU Hot Plug || Disabled
 +
|}

Версия 11:20, 15 октября 2024

Preface

This manual has been tested for the following types and families of GPU accelerators:

  • Nvidia Tesla T4 – simultaneous operation of 3 accelerators on the motherboard;
  • Nvidia Quadro P620 – simultaneous operation of 4 accelerators on the motherboard.

Procedure for launching graphics accelerators

Nvidia Tesla T4

1. Remove power from the server;

2. Install graphics accelerators in the PCIe x16 slots of the motherboard (x8 with the ability to install x16 expansion cards in them);

3. Apply power to the server;

4. Wait for the image to appear on the screen. Hold down the "ESC" key and wait to enter the BIOS menu;

5. Go to Setup Utility -> Advance -> Socket Configuration -> Common RefCode Configuration;

6. Make settings as shown below; the values ​​of the first three functions are required and the rest are default:

Common RefCode Configuration
1 MMCFG 512M
2 MMIO High Base 56T
3 MMIO High Granularity Size 1024G
4 Isoc Mode Auto
5 Numa Enabled
6 Publish SRAT Enabled
7 SRAT Memory Hot Plug Disabled
8 SRAT CPU Hot Plug Disabled
Источник — https://wiki.vinteo.com/index.php?title=Procedure_for_installing_and_launching_GPU_accelerators_on_Rikor_server_motherboards_based_on_Intel_Xeon_Scalable_CPU&oldid=15775