Connection to SIP PBX: различия между версиями
Alina (обсуждение | вклад) (Новая страница: «When connecting to a SIP PBX, two scenarios are usually used: = Scenario #1 = A unified numbering plan is configured on the VINTEO server and the PBX, i.e., conf...») |
Alina (обсуждение | вклад) |
||
Строка 8: | Строка 8: | ||
* PBX IP address; | * PBX IP address; | ||
* Allow incoming calls from the PBX. | * Allow incoming calls from the PBX. | ||
+ | [[Файл:SIP PBX.jpg|800px|безрамки|центр|SIP PBX]] |
Версия 16:58, 8 октября 2024
When connecting to a SIP PBX, two scenarios are usually used:
Scenario #1
A unified numbering plan is configured on the VINTEO server and the PBX, i.e., conference numbers and user numbers on VINTEO do not intersect with user numbers on the PBX. A trunk without registration is set up between the VINTEO server and the PBX. In this case, PBX users can call the number of a specific conference, and if they are added there as participants (as Loop users) or the conference is open, they can enter it without entering a PIN code. When calling PBX users from VINTEO, they will see the number of the conference from which they are called.
It is necessary to create a SIP-type gateway. "System" - "Gateways" - "Add Gateway" and enter the following on the "Basics" tab:
- Gateway name;
- PBX IP address;
- Allow incoming calls from the PBX.