Command line (console) via SSH protocol

Command line (console) via SSH protocol

Terminal command line

You can connect to the terminal via SSH protocol and control it with text commands in console mode. Login and password for SSH access is the same as for access to the web-interface.

The following command descriptions are valid starting with terminal version 2.9.2.

Command structure

mute	<id>	<on/off>	[<participant>]	<”name”>
keyword	mandatory argument, a user must specify its value	mandatory argument, which possesses only the specified set of values	optional argument, a user can specify it if necessary; If it’s not specified, command affects only a terminal	a mandatory string argument, if it contains spaces, it must be passed in quotes

Examples

Task	Use case
Get information about the microphone status	mute get <participant> response: mute <participant> <on/off>
Enable/disable the microphone (bool)	mute <on/off> mute <participant> <on/off>
Get information about the camera status	video get <participant> response: video <participant> <on/off>
Enable/disable self camera (bool)	video get <on/off> video get <participant> <on/off>
Get the list of available cameras	camera list response: camera {"cameras":[{"format":"YUYV","fps":"30","height":"1080","id":"00-00 Eco Capture Dual HDMI M.2","name":"00-00 Eco Capture Dual HDMI M.2","path":"/dev/video0","role":"main&presentation","width":"1920"},{"format":"YUYV","fps":"30","height":"1080","id":"00-01 Eco Capture Dual HDMI M.2","name":"00-01 Eco Capture Dual HDMI M.2","path":"/dev/video1","role":"not_set","width":"1920"}]}
sends ICMP ECHO_REQUEST packets to a network host;	ping <ip address>
outputs a packet route trace to the network host;	traceroute <ip address>
clears the console screen;	clear
a list of available commands;	help
command line exit;	exit

The example of the camera parameters request command

camera info "ImagePlus_UHD_Media_20200924173"
     Format: MJPG
      Size: 1920x1080
         Interval: 30*
         Interval: 25
         Interval: 20
     Format: H264
      Size: 1920x1080
         Interval: 30*
         Interval: 25
         Interval: 20
     Format: HEVC
      Size: 1920x1080
         Interval: 30*
         Interval: 25
         Interval: 20
OK

Set a camera role	camera set <id> <role> [<width>] [<height>] [<fps>] [<format>] OK camera set "UHD_Media" main&presentation response: camera OK
Move a camera	down|left|right|zoom+|zoom-|stop> [<step>] ("step" argument stops the camera after one movement step without sending the "stop" command) response: camera move left OK
Save a camera preset	camera preset set <number> response: camera preset set 1 OK
Save a preset with a camera movement	camera preset go <number> response: camera preset go 2 OK
Request a contacts list	addrbook all response: addrbook all [{"id":8,"name":"Alex","number":"10.1.0.10","status":"0","type":"auto"}]
Add a contact	addrbook add <”name”> <number> <type> response: addrbook add OK
Change a contact	addrbook edit <id> <”name”> <number> <type> response: addrbook edit OK
Delete a contact	addrbook remove <id> response: addrbook remove 8 OK
Make a call	dial manual <number> [<speed>][<resolution>][<type>][<fps>] response: dial auto 10.0.0.1 OK
Finish a call	hangup all response: hangup all OK
Disconnect a participant	hangup <participant> response: hangup Alex OK
Accept an incoming call	accept <id> <id> - may be a temporary ID assigned to a caller displayed in a command line, a.g.: [event] call-incoming FqEWhO4E333RIebFGlMHvsrK SIP SIP/1004 connection transfer response: accept FqEWhO4E333RIebFGlMHvsrK OK
Reject an incoming call	decline <id> <description> response: decline 8 <description> OK