Home page of the main interface

Terminal information

Terminal Name

It is used to identify the terminal. When making an outgoing call, it is its Caller ID. Terminal name is set in the “System name” item of the "Main settings" menu.

Day of week, date, time

It is recommended to check it against the current date and time. You can set it in the “Date/time” item of the "Main settings".

SIP/H.323 registration

The status of SIP and H.323 registration is displayed. The registration is configured in the “SIP/H323” item of the "System settings" menu.

IP address

The current IP address is displayed. If there is no network connection, the message "no connection" is displayed. The network interface is configured in the “Network” item of the "System settings".

Outgoing call

The “Enter number” field

Enter an account number or conference number of the server in this field (e.g.: 10.0.0.1, 1000@10.0.0.100, 1000@test.com). You can enter the number without focusing on the line.

Use the “Call” button (11) to make an outgoing call to the entered number. Focus on the line is not required. To enter letters, press the "Number" buttons (12) repeatedly to cycle through the letters.

Characters are deleted by pressing the Backspace (10).

The "Enter number" field has two modes:

• input mode, which is set by default. The field is framed white after focusing on it. It is only possible to type and delete characters one by one;
• edit mode is set by pressing the OK button (19) in the line.

In edit mode, the module window with keypad and speed dial from the address book (the “Found” widget on the left). Move focus with navigation buttons (4, 5, 6, 7), use “OK” (19) to select a character. Exit is by the "Return" (8) button on a remote control or the "Ok" button on the keypad.

Protocol

You can select the outgoing call protocol in a drop-down list. The default is "Auto".

To select it do the following:

1. move the focus to the "Protocol" option;
2. press "OK" (19) to open the list;
3. move the focus to the required line;
4. confirm with "OK" (19);
5. exit without saving is for the "Return" button (8).

Speed