Conference management web page: различия между версиями

Материал из База знаний VINTEO
 
(не показаны 84 промежуточные версии этого же участника)
Строка 7: Строка 7:
  
 
*[[Appendix 1]]
 
*[[Appendix 1]]
== The information part ==
+
==<span id = 'Information part'> The information part </span>==
  
 
The information part is located in the upper right corner of the page. The information part displays the current conference status, CPU load and conference time. The information part provides access to some functions.
 
The information part is located in the upper right corner of the page. The information part displays the current conference status, CPU load and conference time. The information part provides access to some functions.
Строка 30: Строка 30:
 
=== Player ===
 
=== Player ===
  
The ''Player'' function allows you to add previously downloaded videos. Choose the file you need from the Videos dropdown list. Switch to on the ''Auto repeat enable'' function if you need and click the ''Add'' button. If you do not switch on the ''Auto repeat enable'' function a video will play until the end and it will be set off from the conference.  
+
The ''"Player"'' function allows you to add previously downloaded videos. Choose the file you need from the Videos dropdown list. Switch to the ''"Auto repeat enable"'' function if you need and click the ''"Add"'' button. If you do not switch on the ''"Auto repeat enable"'' function a video will play until the end and it will be set off from the conference.
  
 
=== Video stream ===
 
=== Video stream ===
  
The ''Video stream'' function allows you to add a video from different sources by HTTP and RTSP protocols. To add a video, enter a description in the ''Stream description'' string, enter the stream address in the ''Video stream URL'' string and click the ''Add'' button.
+
The ''"Video stream"'' function allows you to add a video from different sources by HTTP and RTSP protocols. To add a video enter a description in the ''"Stream description"'' field, enter the stream address in the ''"Video stream URL"'' field and click the ''"Add"'' button.
  
  ''For example, to connect streaming video from a CCTV Beward camera, you need to enter an address in the following format.
+
  ''For example, to connect streaming video from a CCTV Beward camera you need to enter an address in the following format:
 
  rtsp://XXX.XXX.XXX.XXX:YYY/user&password&channel1&stream''
 
  rtsp://XXX.XXX.XXX.XXX:YYY/user&password&channel1&stream''
*ХХХ.ХХХ.ХХХ.ХХХ is a device network address.
+
 
*: YYY is the port of the RTSP stream specified in the device configuration (default: 554).
+
Attention! It is not allowed to use the @ symbol in a password.
*user is an administrative user of the device with the right to view the stream.
+
 
*user is an administrative user of the device with the right to view the stream.
+
* ХХХ.ХХХ.ХХХ.ХХХ is a device network address.
*password is the password of the administrative user of the device.
+
* :YYY is the port of the RTSP stream specified in the device configuration (default: 554).
*video stream is the digital number of the stream. If your device has more than one stream (0 = main stream).
+
* user is an administrative user of the device with the right to view the stream.
 +
* password is the password of the administrative user of the device.
 +
* video stream is the digital number of the stream. If your device has more than one stream (0 = main stream).
  
 
=== Message ===
 
=== Message ===
  
The Messages function allows you to show a message on the screen. Enter a text of the message in the field. Choose how many seconds to display this message. Click the Send button. The message will be shown to all conference participants.
+
''“Message”'' is the button in the upper right part of the panel that allows you to send messages to the conference.
 +
 
 +
'''Sending a message'''
 +
 
 +
Click on the button with the image of an envelope - the modal window will open;
 +
[[Файл:Conference management Messages.jpg|800px|безрамки|центр|Conference management Messages]]
 +
Enter text (the maximum length of one message is 500 characters) in the modal window in the “Message” field.
 +
 
 +
Click the “Send” button.
 +
[[Файл:Display message.jpg|800px|безрамки|центр|Display message]]
 +
 
 +
'''Cancelation sending a message'''
 +
 
 +
The function allows you to delete a sent displayed message. For do this:
 +
 
 +
Click the “Clear screen” button. The sent message will disappear from the screen.
 +
 
 +
'''Sending a message to one or more selected conference participants'''
 +
 
 +
The function that allows you to send a message to the selected participant/s. For do this:
 +
 
 +
* set the “Choose from list” filter. The “Participants” block and the search bar will appear;
 +
* in the “Participants” block at the end of the list line on the right check the box opposite the name of the account/accounts to whom you want to send the message. If there are more than 4 participants the list acquires a scroll element;
 +
* enter text in the “Message” field;
 +
* click the “Send” button.
 +
 
 +
'''Message display settings'''
 +
 
 +
This functionality allows you to use various message design options as well as create the templates.
 +
 
 +
This may be necessary if there is a possibility that the message may merge with the image on the screen as well as to focus the attention of participants.
 +
 
 +
To change the design of the message click the “Display settings” button which will open an additional window block. In this block you can set:
 +
[[Файл:Display Message.jpg|800px|безрамки|центр|Display Message]]
 +
* message text color;
 +
* font size;
 +
* position;
 +
* number of repetitions: the message is shown as many times as set in the field + one display. If in the field set to “0” then the message is shown once;
 +
* background color;
 +
* background transparency;
 +
* speed.
 +
 
 +
'''Adding a template'''
 +
 
 +
To add a message design template set all the settings listed above, enter the name of the template in the appropriate field and click the “Save as template” button.
 +
[[Файл:Template.jpg|800px|безрамки|центр|Template]]
 +
All set parameters with values ​​will be displayed below; to the right of each created template there is the button with a trash can image for deleting the template.
 +
 
 +
'''Saving message text and design'''
 +
 
 +
A template can contain message styles and text or just the message design. To add a message design template set all the settings listed above, enter the name of the template in the appropriate field and click the “Save as template” button. You can send a message without filling out the input field by clicking on the template with text and display settings.
  
 
=== Conference log ===
 
=== Conference log ===
Conference log function allows you to view all actions and calls of participants and open the modal window with logs of the conference.  
+
Pressing the button opens the window with conference logs and allows you to view all actions and calls of participants.
 
[[Файл:Conference log - Vinteo.jpg|800px|безрамки|центр|Conference log - Vinteo]]
 
[[Файл:Conference log - Vinteo.jpg|800px|безрамки|центр|Conference log - Vinteo]]
 
[[Файл:Conference log2 - Vinteo.jpg|800px|безрамки|центр|Conference log2 - Vinteo]]
 
[[Файл:Conference log2 - Vinteo.jpg|800px|безрамки|центр|Conference log2 - Vinteo]]
Строка 59: Строка 111:
 
[[Файл:Connection link - Vinteo.jpg|800px|безрамки|центр|Connection link - Vinteo]]
 
[[Файл:Connection link - Vinteo.jpg|800px|безрамки|центр|Connection link - Vinteo]]
  
==<span id = 'chatTab'> Закладка "Чат"</span> ==
+
==<span id = 'Chat tab'> "Chat" tab </span>==
  
Закладка "Чат" появится справа в верхней части, если включить переключатель "Чат" в окне настроек "Веб-трансляции".
+
The "Chat" tab will appear at the top right if you turn on the "Chat" switch in the "Webcast" settings window.
 
[[Файл:Управление конференцией - Веб-трансляция - Настройки.jpg|800px|безрамки|центр|Веб-трансляция - Настройки]]
 
[[Файл:Управление конференцией - Веб-трансляция - Настройки.jpg|800px|безрамки|центр|Веб-трансляция - Настройки]]
 
<br>
 
<br>
 
[[Файл:Управление конференцией - Чат.jpg|800px|безрамки|центр|Управление конференцией - Чат]]
 
[[Файл:Управление конференцией - Чат.jpg|800px|безрамки|центр|Управление конференцией - Чат]]
Нажмите кнопку "Сохранить" для применения настроек.
+
Click the "Save" button to apply the settings.
  
Чтобы отобразилась статистика чата, нажмите на ссылку "Участников онлайн".  
+
To display chat statistics click on the "Participants online" link.
 
[[Файл:Статистика чата.jpg|800px|безрамки|центр|Статистика чата]]
 
[[Файл:Статистика чата.jpg|800px|безрамки|центр|Статистика чата]]
  
== <span id = 'autosecretary'>Закладка "Автосекретарь" </span>==
+
== <span id = 'autosecretary'>"Auto attendant" tab </span>==
  
Закладка "Автосекретарь" отображается в верхней правой части экрана при попытке звонка на номер выключенной конференции или на несуществующий номер.
+
The "Auto attendant" tab appears in the upper right part of the screen when you try to call a disabled conference number or a non-existent number.
  
 
[[Файл:Управление конференцией Автосекретарь.jpg|800px|безрамки|центр|Управление конференцией Автосекретарь]]
 
[[Файл:Управление конференцией Автосекретарь.jpg|800px|безрамки|центр|Управление конференцией Автосекретарь]]
Строка 78: Строка 130:
 
[[Файл:Управление конференцией - Автосекретарь2.jpg|800px|безрамки|центр|Управление конференцией - Автосекретарь2]]
 
[[Файл:Управление конференцией - Автосекретарь2.jpg|800px|безрамки|центр|Управление конференцией - Автосекретарь2]]
  
В закладке находится ссылка, вызывающая окно перемещения в конференцию из "Автосекретаря".  
+
The tab contains a link that opens the window for moving to the conference from the Auto attendant.
  
[[Файл:Управление конференцией - Автосекретарь3.jpg|800px|безрамки|центр|Управление конференцией - Автосекретарь3]]
+
When you click the "Confirm" button you can move the participant to the conference or disconnect him from the server when you click the "Disconnect" button.
  
<span id = 'autosecretary2'>При нажатии кнопки "Подтвердить" вы можете переместить участника в конференцию либо отключить его от сервера при нажатии кнопки "Отключить".</span>
+
The "Move to conference" window displays the number of the caller.
  
В окне "Перемещение в конференцию" отображается номер позвонившего участника.
+
==<span id= 'Navigation part'> Navigation part </span>==
 
 
== Navigation part ==
 
 
[[English]] / [[General Description]] / [[Web interface for configuration and management]] / Navigation part
 
[[English]] / [[General Description]] / [[Web interface for configuration and management]] / Navigation part
  
''Navigation part is'' located under the Information part. Navigation part allows you to go to ''Settings'', ''Layout'' and ''Participants'' tabs. The Navigation part displays the maximum channel width, the number of connected conference participants and the duration of the conference, if you specified it.
+
''Navigation part'' is located under the Information part. Navigation part allows you to go to ''"Settings"'', ''"Layout"'' and ''"Participants"'' tabs. It also shows the maximum channel width (a parameter in which the conference the sum of the bitrate values ​​for all participants added to the conference displays for the administrator), the number of connected participants and the conference validity period, if one is set.
 
[[Файл:Conference management - Vinteo Navigation part.jpg|800px|безрамки|центр|Vinteo Navigation part]]
 
[[Файл:Conference management - Vinteo Navigation part.jpg|800px|безрамки|центр|Vinteo Navigation part]]
== Main part ==
+
 
 +
==<span id = 'Main part'> Main part </span>==
 
[[English]] / [[General Description]] / [[Web interface for configuration and management]] / Main part
 
[[English]] / [[General Description]] / [[Web interface for configuration and management]] / Main part
  
Строка 101: Строка 152:
 
*Position
 
*Position
 
*Presentation
 
*Presentation
*Web cast
+
*Webcast
 
[[Файл:Conference management - Vinteo Main part.jpg|800px|безрамки|центр|Conference management - Vinteo Main part]]
 
[[Файл:Conference management - Vinteo Main part.jpg|800px|безрамки|центр|Conference management - Vinteo Main part]]
 +
The main part also contains a panel with functionality for sorting, filtering and other options:
 +
 +
[[Файл:Main part Filtering.jpg|800px|безрамки|центр|Main part Filtering]]
 +
# the "Add participant" button opens the modal window for adding a participant to the conference;
 +
# search line by name or participant number;
 +
# pagination which allows you to select the number of accounts displayed on the page;
 +
# the number on the left is the counter of participant entries on previous pages; the number on the right is the total number of participant entries;
 +
# page pagination: moving to the next or previous page;
 +
# фильтр по статусам абонентов:
 +
# filter by accounts statuses:
 +
[[Файл:Main page Filtering 2.jpg|800px|безрамки|центр|Main page Filtering 2]]
 +
* "Online" - connected to the conference at the time of filtering;
 +
* "Offline" - accounts not connected to the conference;
 +
* "Request for a word" - filter by the status of participants who requested a word;
 +
* "Disconnected" - sorting participants disconnected from the server;
 +
* "On screen" - status, when selected the video launched as a presentation will be shown;
 +
Note: the "On all screens" filter displays not only participants in the main layout but also participants who have personal layouts.
 +
 +
7. “Additional information” is the switch that displays additional connection parameters;
  
 +
8. ways to display participants: as the line, tile or short list.
 
=== Recording ===   
 
=== Recording ===   
  
Строка 121: Строка 192:
 
  Note: Initially, both video and audio are recorded, and only after the end of the recording when saving the selected audio only recording option is applied.
 
  Note: Initially, both video and audio are recorded, and only after the end of the recording when saving the selected audio only recording option is applied.
  
In the Layout tab you can change the way of its order with Use the selected layout of the conference checkbox or with Use the general layout of the conference checkbox you can leave the automatic distribution of participants without affecting the conference layout.
+
In the “Layout” tab you can change the way it is organized: “Use the selected layout of the conference” without affecting the conference layout or leave the automatic distribution of participants “Use the general layout of the conference”.
  
 
''A list of available layouts is found in ''[[Appendix 1]]'' 1 of this manual.''
 
''A list of available layouts is found in ''[[Appendix 1]]'' 1 of this manual.''
Строка 131: Строка 202:
 
=== Layout ===
 
=== Layout ===
  
Layout button controls of the view of mosaic and number of participants displayed at the same time.
+
There are two tabs on the page:
  
=== Position ===
+
1. “Mosaic” on which it is possible to control the type of mosaic and the number of simultaneously displayed participants. The list of available layouts is described in "Appendix 1" to this manual;
  
The Position button opens a modal window with an image of the selected numbered layout and an up-to-date list of participants occupying the corresponding positions. The layout changes online when participants move in the layout.
+
2. “Presets” which displays the created presets. More information about creating presets is described in this article.
  
=== Presentation ===
+
There is also a “Show positions” checkbox here which allows you to see the occupied positions on saved presets.
 +
[[Файл:Presets.jpg|800px|безрамки|центр|Presets]]
  
The Presentation button is divided into two parts. The left one enables / disables the video stream with the presentation. The right side of the button gives access to the settings for selecting the presentation source and changing settings. There are two available presentation sources: the default VNC and the Vinteo Scteencast app.
+
To apply a preset to a conference select it and click the ''“Select for conference”'' button.
  
'''VNC'''
+
You can also delete a preset by selecting it and clicking the “Delete” button.
  
There are two operating modes available in VNC settings: these are VNC Server and VNC Client. Settings for VNC Server connection mode.
+
=== Position ===
[[Файл:Conference management - Vinteo Presentation settings.jpg|800px|безрамки|центр|Presentation settings]]
 
  
Presentation source is a button with which you can select VNC protocol or video stream from [[VINTEO Screencast]] program.
+
The Position button opens a modal window with an image of the selected numbered layout and an up-to-date list of participants occupying the corresponding positions. The layout changes online when participants move in the layout.
  
The VNC IP string requires an IPv4 address.
+
=== Presentation ===
  
In the VNC port string, you need to specify the port on which the remote server recognizes incoming connections.  
+
This button turns on/off the video stream with the presentation from the pre-configured sources.
  
In the VNC password string, you need to enter the password from the remote VNC server.
+
If at least one frame of the presentation was shown then instead of the video from the participant this frame will be shown.
  
Connection mode is a button that allows you to change the following settings when ‘Client’ is selected.
+
=== Webcast settings ===
[[Файл:Conference management - Vinteo Presentation settings VNC.jpg|800px|безрамки|центр|Presentation settings VNC]]
 
  
Standby connection port is a string in which you need to specify the port on which you want to listen for incoming connections.
+
The “Webcast” button is divided into two parts: the left part turns the broadcast on/off; the right part gives access to the broadcast display settings. In the settings on the “HLS” tab you can change:
 +
[[Файл:Conference management - Vinteo Web cast settings.jpg|800px|безрамки|центр|Web cast settings]]
  
'''Screencast'''
+
* ''"HLS Resolution"'' is a button in the drop-down list of which you can choose the broadcast resolution
[[Файл:Screencast.jpg|800px|безрамки|центр|Screencast]]
 
 
 
When you select a Screencast presentation source, the server waits for the Screencast application to connect to the conference. If the link with the Screencast is established, the 'monitor' image on the Presentation button will change color to green.
 
 
 
Then when the Presentation button will press the Screencast application will require permission to demonstrate the selected presentation source. If an account has selected the Auto answer on request item in the Vinteo Screencast program in the connection settings and has not canceled the request, then in 5 seconds the application will start showing the presentation.
 
 
 
=== Webcast settings ===
 
  
In the modal Webcast settings you can change:
+
* ''"HLS Bandwidth"'' is a button in the drop-down list of which you can choose the broadcast bandwidth.
[[Файл:Conference management - Vinteo Web cast settings.jpg|800px|безрамки|центр|Web cast settings]]
 
  
*HLS Resolution is a button in the drop-down list of which you can choose the broadcast resolution
+
* ''"Enable HLS"'' is the toggle that enables / disables the use of HTTP based streaming media protocol.
  
*HLS Bandwidth is a button in the drop-down list of which you can choose the broadcast bandwidth.
+
* The ''"HLS adaptive bitrate streaming"'' switch allows the server to select the appropriate resolution and the client to request the appropriate video stream depending on the connection capabilities; if the channel does not allow you to select a high resolution the player will request a lower resolution;
  
*Enable HLS is the toggle that enables / disables the use of HTTP based streaming media protocol.
+
* Field ''"HLS time of segments (sec.)"'' sets the duration of an individual segment; by default is 4 (can be set from 2 to 16);
  
*Chat is a toggle that turns on / off the display of text chat on the broadcast screen.
+
* Field ''"HLS segment list size (sec.)"'' sets the number of segments in the playlist; default is 4 (ranges from 2 to 16);
 +
Note: to reduce peak loads on the network during broadcasts (unicast data transmission type) for a large number of viewers it is advisable to increase the time of segments and the number of segments in the broadcast. Increasing the number of segments and their time interval will lead to an increase in broadcast latency but will reduce bursts in network load.
 +
* ''"Chat"'' is the toggle that turns on/off the display of text chat on the broadcast screen.
  
*Webcast password is the string in which you can specify a random password for protecting a broadcast from unauthorized view.
+
* The ''"Clearing the chat when the first participant connects"'' switch must be activated if the conference is always on; this functionality allows you to clear the correspondence of participants in the previous conference;
  
*Temporary link is a string with a link where the broadcast containing the access key is available. The listener can take part in the correspondence if he entered a name / nickname and if the Chat switch is on.
+
* ''"Webcast password"'' is the string in which you can specify a random password for protecting a broadcast from unauthorized view.
  
*Webcast link is the permanent link for the webcast which edit by moderator/administrator. Only Latin, digits, hyphens and underscores can be specified in the Webcast link string.  
+
* ''"Temporary link"'' is a string with a link where the broadcast containing the access key is available. The listener can take part in the correspondence if he entered a name/nickname and if the Chat switch is on.
  
''Multicast'' tab allows you to change:
+
* Webcast link is the permanent link for the webcast which edit by moderator/administrator. Only Latin, digits, hyphens and underscores can be specified in the "Webcast link" string.  
[[Файл:Conference management - Vinteo Multicast.jpg|800px|безрамки|центр|Multicast]]
 
*Multicast Resolution is the button with dropdown list in which you can choose the bandwidth broadcast resolution.
 
*Multicast Bandwidth is the button with dropdown list in which you can choose the broadcast bandwidth. 
 
*Enable multicast is the toggle enable/disable broadcast bandwidth.  
 
  
 
''YouTube'' tab allows you to change:
 
''YouTube'' tab allows you to change:
 
[[Файл:Conference management - MS YouTube.jpg|800px|безрамки|центр|YouTube]]
 
[[Файл:Conference management - MS YouTube.jpg|800px|безрамки|центр|YouTube]]
*YouTube Resolution is the button in with dropdown list in which you can choose a resolution in a broadcast bandwidth transmission.
+
* ''"You Tube resolution"'' is the resolution when transmitting broadcasts in the broadcast range;
*YouTube Bandwidth is the button in with dropdown list in which you can choose a broadcast bandwidth.
+
* ''"YouTube Bandwidth"'' is the broadcast bandwidth in the broadcast range;
*''YouTube stream IP'' is the string in which you can specify the RTPM address server.
+
*''YouTube stream IP'' is the RTPM server address;
*''YouTube stream key'' is the string for specifying the settings of a video coder key.
+
*''YouTube stream key'' is the key from video encoder settings;
 
*''Stream on YouTube'' is the toggle enable/disable a broadcast on YouTube.  
 
*''Stream on YouTube'' is the toggle enable/disable a broadcast on YouTube.  
  
To get the RTMP server address and channel key, follow the link on the YouTube Dashboard and get the key and YouTube broadcast address. On the Position tab, you can change the location of the participants for recording as you want or leave the layout in auto mode.
+
To get the RTMP server address and channel key follow the link on the YouTube Dashboard and get the key and YouTube broadcast address. On the Position tab you can change the location of the participants for recording as you want or leave the layout in auto mode.
  
 
''Manual tab'' allows you to change:
 
''Manual tab'' allows you to change:
 
[[Файл:Conference management - Vinteo WS Manual.jpg|800px|безрамки|центр|Manual]]
 
[[Файл:Conference management - Vinteo WS Manual.jpg|800px|безрамки|центр|Manual]]
*Resolution is the button with dropdown list in which you can choose a broadcast resolution.
+
* ''"Resolution"'' is the resolution when broadcasting;
*Bandwidth is the button with dropdown list in which you can choose a broadcast bandwidth.
+
* ''"Bandwidth"'' is the broadcast bandwidth;
*Format is the string with dropdown where you can select flv for rtmp server, for rtsp server you need to select rtsp and for udp server you need to select mpegts.
+
* ''"Format"'' is the setting for broadcasts to rtmp of the server you should select flv, for rtsp - rtsp, for udp - mpegts;
*Output URL is the string in which you can specify a receiving server address.
+
* ''"Output URL"'' is the string in which you can specify a receiving server address.
 
 
''Layout tab'' allows you to change:
 
 
 
*''Use the selected layout of the conference'' is the checkbox which you can choose if you want to use the selected layout.
 
  
*''Use the general layout of the conference'' is the checkbox which you can choose if you want to use the general layout of the conference.
+
''Layout tab'' allows you to change the way to organize it is “Use the selected layout of the conference” without affecting the conference layout, or leave the automatic distribution of participants then need to use “Use the general layout of the conference”.
  
 
The list of available layouts is found in [[Appendix 1]] of this manual.
 
The list of available layouts is found in [[Appendix 1]] of this manual.
Строка 218: Строка 275:
 
=== End time of the conference ===
 
=== End time of the conference ===
  
The end time of the conference is set at the planning stage of the conference start or during the conference. To change the time of the end of the conference you need to click on the Will finish on [Date], [Time] tab.
+
The end time of the conference is set at the planning stage of the conference start or during the conference. To change the time of the end of the conference you need to click on the ''Will finish on [Date], [Time] tab''.
 
[[Файл:End conference window.jpg|800px|безрамки|центр|End conference window]]
 
[[Файл:End conference window.jpg|800px|безрамки|центр|End conference window]]
Specify a new date and time of ending the current conference in the modal window. Click the ''Edit'' button.
+
Specify a new date and time of ending the current conference in the modal window. Click the ''"Edit"'' button.
  
 
=== Accounts list and DTMF ===
 
=== Accounts list and DTMF ===
Строка 226: Строка 283:
 
The accounts list is divided into a list settings menu in which you can add a participant and change the display quantity of participants. You can also set a filtering of participants by their statuses and change list display mode. Changed settings are displayed in real time.
 
The accounts list is divided into a list settings menu in which you can add a participant and change the display quantity of participants. You can also set a filtering of participants by their statuses and change list display mode. Changed settings are displayed in real time.
 
[[Файл:Participants list.jpg|800px|безрамки|центр|Participants list]]
 
[[Файл:Participants list.jpg|800px|безрамки|центр|Participants list]]
*The choosing of the ''Call'' item of the list call the participant of the conference.
+
 
*''Send invitation'' to the participant.
+
The context menu is also available in this list when you click on a conference participant. From this menu you can perform the following actions when a participant is inactive:
*Delete participants to choose this item from the list.
+
[[Файл:Accounts List DTMF.jpg|800px|безрамки|центр|Accounts List DTMF]]
*Participant settings are available with click on his avatar.
+
*The choosing of the ''"Call"'' item of the list call the participant of the conference.
[[Файл:Conference management - Participant settings.jpg|800px|безрамки|центр|Participant settings]]
+
*''"Send invitation"'' to the participant.
 +
* ''"Delete"'' - the selecting this functionality delete the conference participant;
 +
* Participant settings are available with click on his avatar.
  
 
All settings in this modal window will be correct for this participant only in this conference except for the settings of codecs and connection modes (items 5,6,7,8).
 
All settings in this modal window will be correct for this participant only in this conference except for the settings of codecs and connection modes (items 5,6,7,8).
  
#Watermark - редактируется текущая подпись участника;
+
1. ''"Watermark"'' is the function for edition of the current signature of the participant. To change the signature display, use the minus symbol.
 +
 
 +
Here are some examples:
 +
 
 +
* If you write “-” (minus) in the "Watermark" field then the selected participant’s signature will disappear on the layout and in the list of participants and the signatures of the other participants will remain unchanged;
 +
* when you specify “-” (minus, space) in front of the name of the selected participant the signature on the layout will disappear but will remain in the list of participants;
 +
* another usage scenario together with the titres function which is enabled in the conference settings. We will display the first name, last name and position but the position will be displayed only at the moment the titres appear. To do this we indicate “-” (space minus space) between the last name and position.
 +
 
 +
2. ''"Bandwidth"'' button allows you to choose bandwidth for the participant.
 +
 
 +
3. ''"Resolution"'' button allows you to choose a maximum resolution for the participant.
 +
 
 +
4. ''"FPS"'' is the number of frames per second;
 +
 
 +
5. ''"Codecs"'' is the codecs available for selection;
  
2.Bandwidth button allows you to choose bandwidth for the participant.
+
6. ''"H.264 High Profile"'' is the switch that allows you to use this standard when transmitting video;
  
3.Resolution button allows you to choose a maximum resolution for the participant.
+
7. ''Sending content in the main stream'' is the functionality for accounts who do not support H.239;
  
4.FPS is the button with a dropdown list that allows you to choose a number of frames per second.
+
8. ''"Connect media streams before answer"'' is a switch for the server and terminal to transmit information about the codecs used before the account picks up the phone;
  
5. Codecs is a block with a list of codecs allowed for a participant. If the list is empty, then all codecs from the list on the left are allowed.
+
9. ''"AGC - Automatic Gain Control"'' is the automatic sound gain control performed on the server side;
  
6. H.264 High Profile is a switch to enable H.264 codec support for Polycom terminals.
+
10. ''"Play DTMF"'' is the field where you can edit before calling the participant to the conference the next parameters: dialing format ppp1234 #, where p is the delay before dialing DTMF, after going off-hook, equal to 1s.
  
7. ‘Send content in main’ video is a switch for accounts who do not have H.323 installed.
+
11. ''"Play DTMF to everyone"'' is the switch for sending DTMF signal to all participants;
  
8. 'Connect media streams before answer' is a switch for the server and terminal to transmit information about the codecs used before the subscriber picks up the phone.
+
12. ''"Don't show participant in layout"'' is the switch that allows this account not to be displayed in automatic positions when creating a participant layout;
  
9. AGC is the automatic gain control of a sound on the server.
+
13. ''"Allow to send a presentation"'' is the switch that allows the moderator to control the start or end of the presentation to the participant;
  
10. Play DTMF string where you can edit before calling the participant to the conference, dialing format ppp1234 #, where p is the delay before dialing DTMF, after going off-hook, equal to 1s.
+
14. ''"Sound volume to participant"'' and ''"Sound volume from participant"'' is the settings that set volume levels for this participant.
  
''Layout'' is the tab where you can edit the participant layout.
+
''"Layout"'' is the tab where you can edit the participant layout.
  
When the participant status is active.
+
When the participant status is active:
 
[[Файл:Conference management - Vinteo.jpg|800px|безрамки|центр|Conference management Participant list active]]
 
[[Файл:Conference management - Vinteo.jpg|800px|безрамки|центр|Conference management Participant list active]]
*The ''Disconnect'' feature allows you to disconnect a participant from an ongoing conference, and the participant becomes inactive.
+
* ''"Disconnect"'' is the feature that allows you to disconnect a participant from an ongoing conference and the participant becomes inactive;
*Pressing the ''Mute'' button disconnects the outgoing audio stream from the participant.
+
* ''"Mute"'' is the button that disconnects the outgoing audio stream from the participant;
*Pressing  ''Appoint lecturer'' button assigns this participant as a Lecturer and encloses his video with a yellow border.
+
* ''"Appoint lecturer"'' is the button that assigns this participant as a Lecturer and encloses his video with a yellow border;
*Pressing the ''Disable camera'' button turns off the outgoing video stream from the participant.
+
* ''"Disable camera"'' is the button that turns off the outgoing video stream from the participant;
*Pressing the ''Disable audio'' button turns off the incoming audio stream from the participant;  
+
* ''"Do not show the participant in the layout"'' is the setting that allow you to participate in the conference without displaying it in the layout;
*Pressing the ''Disable video'' button turns off the incoming audio stream from the participant;  
+
* ''"Disable audio"'' is the button that turns off the incoming audio stream from the participant;  
*Pressing the ''Show participant'' button displays the participant's video stream to a position previously reserved for him on the mosaic layout.
+
* ''"Disable video"'' is the button turns off the incoming audio stream from the participant;  
*Pressing the ''Show screenshot'' button displays a screenshot of the video stream from this participant and places it to the left of the participant's name.
+
* ''"Show participant"'' is the button that displays the participant's video stream to a position previously reserved for him on the mosaic layout;
*Pressing the ''Show as presentation'' button displays the incoming video stream from the participant on the screen as a presentation
+
* ''"Send message"'' is the button that opens a window for sending messages to selected participant;
*''Move'' button allows you to move the participant of this conference to any other active conference by selecting it from the drop-down list in the modal window.
+
* ''"Show screenshot"'' “Show/Hide screenshot” is the button that displays a screenshot of the video stream from this participant and places it to the left of the participant’s name;
*Pressing the ''Properties'' button brings up a window with technical information about the participant such as his camera resolution, video codec, audio codec, FPS, RATE, H.239, fpsDV, rateDV, loss, JB and allows you to change the sound volume to and from the participant in the Parameters tab.
+
* ''Show as presentation'' is the button that displays the incoming video stream from the participant on the screen as a presentation;
 +
* ''Move'' the ability to move a participant in this conference to any other active conference by selecting him from the drop-down list in the modal window;
 +
* ''“Send DTMF”'' is the button that opens a modal window with which you can send DTMF signals to the participant;
 +
* “Show the titer” is the button when pressed it the titer is displayed on the participant;
 +
* “Make a spectator” is the setting that allows you to make a conference participant a spectator and vice versa (detailed description of the functionality is given in the article "Spectators" functionality”);
 +
* Pressing the ''Properties'' button brings up the window with technical information about the participant such as his camera resolution, video codec, audio codec, FPS, RATE, H.239, fpsDV, rateDV, loss, JB and allows you to change the sound volume to and from the participant in the "Parameters" tab.
 
[[Файл:Conference management - Vinteo participant settings Details.jpg|800px|безрамки|центр|participant settings Details]]
 
[[Файл:Conference management - Vinteo participant settings Details.jpg|800px|безрамки|центр|participant settings Details]]
The list displays the participants statuses:
 
  
*as tiles when you hover the cursor over the connected participant.
+
==== Managing of a group of participants ====
[[Файл:Conference management - Tiles.jpg|800px|безрамки|центр|Tiles]]
 
  
The statuses are displayed permanently as strings. In this view, you can display additional connection parameters, such as losses, the number of transmitted frames in video streams, the current bitrate of video streams, and so on when you enable the ''Additional information'' item.
 
[[Файл:Conference management - Vinteo Additional information.jpg|800px|безрамки|центр|Additional information]]
 
It is available to display the IP address of the participant and the status of registration on the server in the short list.
 
[[Файл:Conference management - Vinteo Short list.jpg|800px|безрамки|центр|Short list]]
 
Standard statuses display the following participant connection information:
 
*The participant connection status is the string of the participant connection which is colored by a gradient of light green.
 
*The frame of a participant in the Lecturer status is colored light blue.
 
*The time of participant connection.
 
*The frame of a participant in the Lecturer status is colored light blue.
 
*The arrow in front of the video resolution of the connection to the conference participant's server indicates the direction of the flow. If there is a dash instead of a value, then there is no video stream. Information in other statuses is displayed in the same way.
 
*Video codecs used by the conference participant
 
*Audio codecs used by the conference participant.
 
 
Extended statuses display the following conference participant connection information.
 
*The number of frames per second in the participant's video stream.
 
*The current value of the bandwidth occupied by the main video data stream.
 
*The receiving/sending status of the content stream on H.239, BFCP protocols.
 
*The number of frames per second in the content video stream on H.239, BFCP protocols.
 
*The current value of the bandwidth occupied by the additional video stream for transmitting content on H.239 and BFCP protocols.
 
*The number of lost packets and the total percent of losses at the present time in the transmission of the participant's video streams.
 
*The server's adaptive jitter buffer value for a particular participant is measured in milliseconds and reflects the state of the data transfer channel from the participant to the server. The higher this indicator, the greater the video delay for this participant.
 
*Participant connection server. In case cascading is used.
 
 
==== Управление группой участников ====
 
 
[[Файл:Управление конференцией - Панель Обратные д-я.jpg|800px|безрамки|центр|Панель Обратные д-я]]
 
[[Файл:Управление конференцией - Панель Обратные д-я.jpg|800px|безрамки|центр|Панель Обратные д-я]]
Есть возможность управлять настройками группы участников. Если выбрать одного или нескольких участников из списка, появится панель группового управления с кнопками:
+
It is possible to manage the settings of a group of participants. If you select one or more participants from the list a group control panel will appear with the following buttons:
*"Включить" - нажатие этой кнопки добавляет выделенных участников (одного или нескольких) в конференцию;
+
* “Enable” - clicking this button adds the selected participants (one or more) to the conference;
*"Включить микрофон" - кнопка включения микрофона у одного или нескольких участников;
+
* “Turn on microphone” - the button to turn on the microphone for one or more participants;
*"Включить камеру" - кнопка включения камеры у одного или нескольких участников;
+
* “Turn on camera” - the button to turn on the camera for one or more participants;
*"Включить звук" - кнопка включения звука у одного или нескольких участников;
+
* “Turn on sound” - the button to turn on the sound of one or more participants;
*"Включить видео" - кнопка включения видео у одного или нескольких участников;
+
* “Enable video” - the button to enable video for one or more participants;
*"Показать/Скрыть скриншот" - кнопка вывода скриншота у одного или нескольких участников.
+
* “Show/Hide screenshot” - the button for displaying a screenshot for one or more participants.
Если активировать переключатель "Обратные действия", то все перечисленные кнопки приобретут обратный функционал, при этом действие будет производиться с выбранными участниками.  
+
If you activate the "Reverse actions" switch then all the listed buttons will acquire reverse functionality; the action will be performed with the selected participants.
 
      
 
      
В данном списке отображение статусов участников производится следующим образом:  
+
In this list the statuses of participants are displayed as follows:
* в виде плиток, при наведении курсора на подключенного участника;  
+
* in the form of tiles when you hover over a connected participant;
  
 
[[Файл:Статус участника 1.1.jpg|800px|безрамки|центр|Статус участника 1.1]]
 
[[Файл:Статус участника 1.1.jpg|800px|безрамки|центр|Статус участника 1.1]]
  
Изображение закрытого замка показывает, что происходит шифрование RTP-трафика.
+
The image of a closed padlock indicates that RTP traffic is being encrypted.
 
 
[[Файл:Управление Конференцией Замок при подключении.png|800px|безрамки|центр|Управление Конференцией Замок при подключении]]
 
  
* в виде строк статусы отображаются постоянно, в этом виде доступен вывод дополнительных параметров подключения, таких как потери, количество передаваемых кадров в видеопотоках, актуальные битрейт видеопотоков и т.д. при включении пункта "Доп. информация";
+
* statuses are constantly displayed in the form of lines; in this form, additional connection parameters can be displayed, such as losses, the number of transmitted frames in video streams, the current bitrate of video streams, etc. when you turn on the ''"Additional information"'' item;
  
 
[[Файл:Статус участника 1.2.jpg|800px|безрамки|центр|Статус участника 1.2]]
 
[[Файл:Статус участника 1.2.jpg|800px|безрамки|центр|Статус участника 1.2]]
 
   
 
   
* в виде краткого списка – доступно отображение IP-адреса участника и статус регистрации на сервере.  
+
* in the form of a short list displaying the participant’s IP address and registration status on the server is available.
  
 
[[Файл:Статус участника 1.3.jpg|800px|безрамки|центр|Статус участника 1.3]]
 
[[Файл:Статус участника 1.3.jpg|800px|безрамки|центр|Статус участника 1.3]]
  
====Статусы подключения участника====
+
==== Participant connection statuses ====
 
 
Стандартные статусы выводят следующую информацию подключения участника:
 
* светло-зеленый цвет - участник подключён;
 
* строка, окрашенная в тёмно-зеленый - это участник, который показывает презентацию;
 
* текущий лектор – строка выделяется светло-голубым цветом среди подключенных участников;
 
* жёлтый цвет - означает, что участник смотрит веб-трансляцию, а также запрос слова;
 
* серая строка - это добавленный в конференцию участник, но не подключенный;
 
* чёрный цвет означает, что у участника выключен микрофон;
 
  
 +
Standard statuses display the following participant connection information:
 +
* light green color - the participant is connected;
 +
* the line colored dark green is the participant who is giving the presentation;
 +
* current lecturer – the line is highlighted in light blue among connected participants;
 +
* yellow color means that the participant is watching the webcast, as well as a word request;
 +
* the gray line is a participant added to the conference but not connected;
 +
* black color means that the participant’s microphone is muted;
  
 
[[Файл:Статус участника 1.4.jpg|800px|безрамки|центр|Статус участника 1.4]]
 
[[Файл:Статус участника 1.4.jpg|800px|безрамки|центр|Статус участника 1.4]]
 
    
 
    
* Время подключения участника;  
+
* Participant connection time;
  
 
[[Файл:Статус участника 1.5.jpg|800px|безрамки|центр|Статус участника 1.5]]
 
[[Файл:Статус участника 1.5.jpg|800px|безрамки|центр|Статус участника 1.5]]
 
    
 
    
* Видеоразрешение подключения к серверу участника конференций - стрелка перед значением указывает направление потока, если вместо значения появляется прочерк, то видеопотока нет. Аналогичным образом строятся остальные статусы;  
+
* Video resolution for connecting a conference participant to the server: the arrow in front of the value indicates the direction of the stream; if a dash appears instead of the value then there is no video stream. The remaining statuses are constructed in a similar way;
* Используемые видеокодеки подключения участника конференций;  
+
* Video codecs used to connect the conference participants;
* Используемые аудиокодеки подключения участника конференции;  
+
* Audio codecs used to connect the conference participant;
  
 
[[Файл:Статус участника 1.4.jpg|800px|безрамки|центр|Статус участника 1.4]]   
 
[[Файл:Статус участника 1.4.jpg|800px|безрамки|центр|Статус участника 1.4]]   
 
   
 
   
Расширенные статусы выводят следующую информацию подключения участника:  
+
Extended statuses display the following participant connection information:
 
 
[[Файл:Статус участника 1.7.jpg|800px|безрамки|центр|Статус участника 1.7]]
 
 
    
 
    
* Количество кадров в секунду в видеопотоках участника;  
+
* ''The number of frames per second'' in the participant’s video streams;
* Текущее значение полосы пропускания, занимаемое основным потоком видеоданных;
+
* ''The current value of bandwidth'' occupied by the main video data stream;
* Forward error correction - восстановление потерянных пакетов;  
+
* Forward error correction - recovery of lost packets;  
* Overhead - дополнительный трафик, который содержит дубликаты пакетов, с помощью которых произойдет восстановление, если какие-либо пакеты будут потеряны.
+
* ''Overhead'' is the additional traffic that contains duplicate packets with the help of which recovery will occur if any packets are lost; 
 
+
* Status of receiving/sending content stream via H.239, BFCP protocols;  
[[Файл:Статус участника 1.8.jpg|800px|безрамки|центр|Статус участника 1.8]]
+
* Number of frames per second in a video content stream using H.239, BFCP protocols;  
 
 
* Статус приема/отправки потока контента по протоколам H.239, BFCP;  
 
* Количество кадров в секунду в видеопотоке контента по протоколам H.239, BFCP;  
 
  
 
[[Файл:Статус участника 1.9.jpg|800px|безрамки|центр|Статус участника 1.9]]
 
[[Файл:Статус участника 1.9.jpg|800px|безрамки|центр|Статус участника 1.9]]
 
    
 
    
* Текущее значение полосы пропускания, занимаемое дополнительным видеопотоком для передачи контента по протоколам H.239 и BFCP;  
+
* The current value of bandwidth occupied by the additional video stream for transmitting content via the H.239 and BFCP protocols;
* Количество потерянных пакетов и общий процент потерь в настоящий момент времени в передаче видеопотоков участника;
+
* The number of lost packets and the total percentage of losses at the current time in the transmission of video streams of the participant;
  
 
[[Файл:Статус участника 1.10.jpg|800px|безрамки|центр|Статус участника 1.10]]
 
[[Файл:Статус участника 1.10.jpg|800px|безрамки|центр|Статус участника 1.10]]
 
+
 
+
* The value of the server's adaptive jitter buffer for a specific participant is measured in milliseconds and reflects the state of the data transmission channel from the participant to the server; the higher this indicator the greater the video delay for this participant;
* Значение адаптивного джитер-буфера сервера для конкретного участника измеряется в миллисекундах и отражает состояние канала передачи данных от участника к серверу, чем выше этот показатель, тем больше задержка видеоизображения у данного участника;  
+
* Participant connection server if cascading is used.
* Сервер подключения участника, в случае если используется каскадирование.
 
  
 
[[Файл:Статус участника 1.11.jpg|800px|безрамки|центр|Статус участника 1.11]]
 
[[Файл:Статус участника 1.11.jpg|800px|безрамки|центр|Статус участника 1.11]]
  
* Информация о входящем и исходящем аудиоканалах.
+
* Information about incoming and outgoing audio channels.
 
[[Файл:1.12.jpg|800px|безрамки|центр|1.12]]
 
[[Файл:1.12.jpg|800px|безрамки|центр|1.12]]
  
== <span id = "lostIndicator"> Индикация потерь </span> ==
+
== <span id = "lossesIndicator"> Losses indicator </span> ==
  
  ''На индикаторе потерь отображаются входящие и исходящие потери. Для каждого направления показано общее количество потерянных пакетов и мгновенные потери пакетов в процентах.''
+
  ''The loss indicator displays incoming and outgoing losses. For each direction the total number of packets lost and the instantaneous packet loss as a percentage are shown.''
  
Определить наличие и величину потерь сетевых пакетов отдельных подключений к сеансу ВКС можно в "Управлении конференцией".
+
You can determine the presence and amount of network packet losses of individual connections to a video conferencing session in ''“Conference management”''.
Для этого нужно выбрать расширенное отображение участников в конференции и включить переключатель "Доп. информация".
+
To do this you need to select an expanded display of participants in the conference and turn on the ''"Additional information" switch.''
  
 
[[Файл:Индикация потерь.jpg|800px|безрамки|центр|Индикация потерь]]
 
[[Файл:Индикация потерь.jpg|800px|безрамки|центр|Индикация потерь]]
  
Информацией о потерях стороны подключения (сервер и клиент) обмениваются по протоколу RTCP (https://datatracker.ietf.org/doc/html/rfc3550#section-6 ) отправляя раз в 2-3 секунды друг другу Receiver Report (RR) (https://datatracker.ietf.org/doc/html/rfc3550#section-12.1), который содержит следующие параметры:
+
Information about losses on the connection side (server and client) is exchanged via the RTCP protocol (https://datatracker.ietf.org/doc/html/rfc3550#section-6 ) sending to each other Receiver Report (RR) (https://datatracker.ietf.org/doc/html/rfc3550#section-12.1) once every 2-3 seconds which contains the following parameters:
  
Cumulative number of packets lost - общее количество потерянных пакетов, считается с момента подключения участника к серверу.<br>
+
Cumulative number of packets lost - the total number of lost packets is counted from the moment the participant connects to the server.<br>
Fraction lost - доля потерянных пакетов, рассчитанная за время с момента предыдущего отправленного отчета RR.
+
Fraction lost - the fraction of packets lost calculated over the time since the previous RR was sent.
  
Скриншот из программы Wireshark c дампом сетевого трафика SIP-подключения и наложенным фильтром для отображения только пакетов протокола RTCP:
+
Screenshot from Wireshark with a dump of SIP connection network traffic and an applied filter to display only RTCP protocol packets:
 
[[Файл:Индикация потерь 2.jpg|800px|безрамки|центр|Индикация потерь 2]]
 
[[Файл:Индикация потерь 2.jpg|800px|безрамки|центр|Индикация потерь 2]]
  
Именно эти значения и выводятся на индикаторе потерь по каждому подключению:
+
These are the values ​​that are displayed on the loss indicator for each connection:
 
[[Файл:Индикация потерь 3.jpg|800px|безрамки|центр|Индикация потерь 3]]
 
[[Файл:Индикация потерь 3.jpg|800px|безрамки|центр|Индикация потерь 3]]
  
На индикаторе отображаются отдельно входящие (1) и исходящие (2) потери.
+
The indicator displays separately incoming (1) and outgoing (2) losses.
 
[[Файл:Индикация потерь 4.jpg|800px|безрамки|центр|Индикация потерь 4]]
 
[[Файл:Индикация потерь 4.jpg|800px|безрамки|центр|Индикация потерь 4]]
  
Пересчет информации производится при получении или отправке каждого RR: входящие потери (in) считает сервер, а  исходящие потери (out) считает клиент.
+
Information is recalculated when each RR is received or sent: incoming losses (in) are counted by the server and outgoing losses (out) are counted by the client.

Текущая версия на 14:01, 11 июня 2024

English / General Description / Web interface for configuration and management / Conference management web page

The page is visually divided into three parts:

  1. Information part
  2. Navigation part
  3. Main part

The information part

The information part is located in the upper right corner of the page. The information part displays the current conference status, CPU load and conference time. The information part provides access to some functions.

Conference management 1

The Dialing

The Dialing function allows you to call a subscriber by IP address or SIP / H.323 URI address, select the resolution of the connected participant, channel width and the number of frames per second. The account you dial will be connected until the end of the call and will not be saved in the list of conference participants. This account can be called multiple times during the conference.

Add participant

The "Add participant" function allows you to create a new participant, select an existing participant, move a participant or add a previously created group of participants. Only those accounts and groups that are visible to the moderator in the address book are available in the list of participants and groups.

To add an account with the "SIP(uri)" type there is one condition: before adding the "name@domain" participant a gateway must be created on the server with the "From domain" line filled in. After adding a participant a “Direction” = name and an account in the address book with the “Loop” type are automatically created in this gateway.

To add an existing account you can use the search line and select the required account. After creating an account you can call him as a participant by clicking the “Add” button.

When you add a participant to a conference you can call them immediately. To do this turn on the “Call participant” switch and then click “Add”.

To move an account from another active conference select the conference from the list; then from the list of the “Participants” tab select the active participant and click the “Add” button. The participant will be called automatically. To add a group of accounts select several accounts from the “Group” list and click the “Add” button. The participants will be called automatically.

Player

The "Player" function allows you to add previously downloaded videos. Choose the file you need from the Videos dropdown list. Switch to the "Auto repeat enable" function if you need and click the "Add" button. If you do not switch on the "Auto repeat enable" function a video will play until the end and it will be set off from the conference.

Video stream

The "Video stream" function allows you to add a video from different sources by HTTP and RTSP protocols. To add a video enter a description in the "Stream description" field, enter the stream address in the "Video stream URL" field and click the "Add" button.

For example, to connect streaming video from a CCTV Beward camera you need to enter an address in the following format:
rtsp://XXX.XXX.XXX.XXX:YYY/user&password&channel1&stream
Attention! It is not allowed to use the @ symbol in a password.
  • ХХХ.ХХХ.ХХХ.ХХХ is a device network address.
  • :YYY is the port of the RTSP stream specified in the device configuration (default: 554).
  • user is an administrative user of the device with the right to view the stream.
  • password is the password of the administrative user of the device.
  • video stream is the digital number of the stream. If your device has more than one stream (0 = main stream).

Message

“Message” is the button in the upper right part of the panel that allows you to send messages to the conference.

Sending a message

Click on the button with the image of an envelope - the modal window will open;

Conference management Messages

Enter text (the maximum length of one message is 500 characters) in the modal window in the “Message” field.

Click the “Send” button.

Display message

Cancelation sending a message

The function allows you to delete a sent displayed message. For do this:

Click the “Clear screen” button. The sent message will disappear from the screen.

Sending a message to one or more selected conference participants

The function that allows you to send a message to the selected participant/s. For do this:

  • set the “Choose from list” filter. The “Participants” block and the search bar will appear;
  • in the “Participants” block at the end of the list line on the right check the box opposite the name of the account/accounts to whom you want to send the message. If there are more than 4 participants the list acquires a scroll element;
  • enter text in the “Message” field;
  • click the “Send” button.

Message display settings

This functionality allows you to use various message design options as well as create the templates.

This may be necessary if there is a possibility that the message may merge with the image on the screen as well as to focus the attention of participants.

To change the design of the message click the “Display settings” button which will open an additional window block. In this block you can set:

Display Message
  • message text color;
  • font size;
  • position;
  • number of repetitions: the message is shown as many times as set in the field + one display. If in the field set to “0” then the message is shown once;
  • background color;
  • background transparency;
  • speed.

Adding a template

To add a message design template set all the settings listed above, enter the name of the template in the appropriate field and click the “Save as template” button.

Template

All set parameters with values ​​will be displayed below; to the right of each created template there is the button with a trash can image for deleting the template.

Saving message text and design

A template can contain message styles and text or just the message design. To add a message design template set all the settings listed above, enter the name of the template in the appropriate field and click the “Save as template” button. You can send a message without filling out the input field by clicking on the template with text and display settings.

Conference log

Pressing the button opens the window with conference logs and allows you to view all actions and calls of participants.

Conference log - Vinteo
Conference log2 - Vinteo

Connection link

Connection link function open the modal window with fields which has links to the web client and links for dialing Vinteo Desktop with and without pin code. The moderator may send the link to the participant of the conference in the manual mode. Links with pin code use for the connection to the conference without the proceed of the authorization or entering the pin code manually.

Connection link - Vinteo

"Chat" tab

The "Chat" tab will appear at the top right if you turn on the "Chat" switch in the "Webcast" settings window.

Веб-трансляция - Настройки


Управление конференцией - Чат

Click the "Save" button to apply the settings.

To display chat statistics click on the "Participants online" link.

Статистика чата

"Auto attendant" tab

The "Auto attendant" tab appears in the upper right part of the screen when you try to call a disabled conference number or a non-existent number.

Управление конференцией Автосекретарь


Управление конференцией - Автосекретарь2

The tab contains a link that opens the window for moving to the conference from the Auto attendant.

When you click the "Confirm" button you can move the participant to the conference or disconnect him from the server when you click the "Disconnect" button.

The "Move to conference" window displays the number of the caller.

Navigation part

English / General Description / Web interface for configuration and management / Navigation part

Navigation part is located under the Information part. Navigation part allows you to go to "Settings", "Layout" and "Participants" tabs. It also shows the maximum channel width (a parameter in which the conference the sum of the bitrate values ​​for all participants added to the conference displays for the administrator), the number of connected participants and the conference validity period, if one is set.

Vinteo Navigation part

Main part

English / General Description / Web interface for configuration and management / Main part

Main part is located under the Navigation part and allows you to see the list of participants, the date, conference ending time and make quick settings for such functions as:

  • Recording
  • Lecturer
  • Layout
  • Position
  • Presentation
  • Webcast
Conference management - Vinteo Main part

The main part also contains a panel with functionality for sorting, filtering and other options:

Main part Filtering
  1. the "Add participant" button opens the modal window for adding a participant to the conference;
  2. search line by name or participant number;
  3. pagination which allows you to select the number of accounts displayed on the page;
  4. the number on the left is the counter of participant entries on previous pages; the number on the right is the total number of participant entries;
  5. page pagination: moving to the next or previous page;
  6. фильтр по статусам абонентов:
  7. filter by accounts statuses:
Main page Filtering 2
  • "Online" - connected to the conference at the time of filtering;
  • "Offline" - accounts not connected to the conference;
  • "Request for a word" - filter by the status of participants who requested a word;
  • "Disconnected" - sorting participants disconnected from the server;
  • "On screen" - status, when selected the video launched as a presentation will be shown;
Note: the "On all screens" filter displays not only participants in the main layout but also participants who have personal layouts.

7. “Additional information” is the switch that displays additional connection parameters;

8. ways to display participants: as the line, tile or short list.

Recording

Recording button is divided into two parts. Its left part switches on/off the record of the conference. Its right side allows you to open the modal window with recording settings. Click on the Recording button and the conference will be recorded with the default settings. The next time the conference is turned on, the recording will be done again.

Conference management - Vinteo Recording

In the main recording settings, you can change:

Resolution
The Resolution string displays the default value set in the settings of the conference itself.

Bandwidth
The string in which you can specify an upper record speed threshold

Sound only recording allows you to choose whether to record audio and video stream or record only audio stream.

Note: Initially, both video and audio are recorded, and only after the end of the recording when saving the selected audio only recording option is applied.

In the “Layout” tab you can change the way it is organized: “Use the selected layout of the conference” without affecting the conference layout or leave the automatic distribution of participants “Use the general layout of the conference”.

A list of available layouts is found in Appendix 1 1 of this manual.

Lecturer

The Lecturer button controls the switch of the ‘Video-selector’ mode. The identificator of the current participant defined as a lecturer will appear on the button when the ‘Video-selector’ mode is enabled.

Layout

There are two tabs on the page:

1. “Mosaic” on which it is possible to control the type of mosaic and the number of simultaneously displayed participants. The list of available layouts is described in "Appendix 1" to this manual;

2. “Presets” which displays the created presets. More information about creating presets is described in this article.

There is also a “Show positions” checkbox here which allows you to see the occupied positions on saved presets.

Presets

To apply a preset to a conference select it and click the “Select for conference” button.

You can also delete a preset by selecting it and clicking the “Delete” button.

Position

The Position button opens a modal window with an image of the selected numbered layout and an up-to-date list of participants occupying the corresponding positions. The layout changes online when participants move in the layout.

Presentation

This button turns on/off the video stream with the presentation from the pre-configured sources.

If at least one frame of the presentation was shown then instead of the video from the participant this frame will be shown.

Webcast settings

The “Webcast” button is divided into two parts: the left part turns the broadcast on/off; the right part gives access to the broadcast display settings. In the settings on the “HLS” tab you can change:

Web cast settings
  • "HLS Resolution" is a button in the drop-down list of which you can choose the broadcast resolution
  • "HLS Bandwidth" is a button in the drop-down list of which you can choose the broadcast bandwidth.
  • "Enable HLS" is the toggle that enables / disables the use of HTTP based streaming media protocol.
  • The "HLS adaptive bitrate streaming" switch allows the server to select the appropriate resolution and the client to request the appropriate video stream depending on the connection capabilities; if the channel does not allow you to select a high resolution the player will request a lower resolution;
  • Field "HLS time of segments (sec.)" sets the duration of an individual segment; by default is 4 (can be set from 2 to 16);
  • Field "HLS segment list size (sec.)" sets the number of segments in the playlist; default is 4 (ranges from 2 to 16);
Note: to reduce peak loads on the network during broadcasts (unicast data transmission type) for a large number of viewers it is advisable to increase the time of segments and the number of segments in the broadcast. Increasing the number of segments and their time interval will lead to an increase in broadcast latency but will reduce bursts in network load.
  • "Chat" is the toggle that turns on/off the display of text chat on the broadcast screen.
  • The "Clearing the chat when the first participant connects" switch must be activated if the conference is always on; this functionality allows you to clear the correspondence of participants in the previous conference;
  • "Webcast password" is the string in which you can specify a random password for protecting a broadcast from unauthorized view.
  • "Temporary link" is a string with a link where the broadcast containing the access key is available. The listener can take part in the correspondence if he entered a name/nickname and if the Chat switch is on.
  • Webcast link is the permanent link for the webcast which edit by moderator/administrator. Only Latin, digits, hyphens and underscores can be specified in the "Webcast link" string.

YouTube tab allows you to change:

YouTube
  • "You Tube resolution" is the resolution when transmitting broadcasts in the broadcast range;
  • "YouTube Bandwidth" is the broadcast bandwidth in the broadcast range;
  • YouTube stream IP is the RTPM server address;
  • YouTube stream key is the key from video encoder settings;
  • Stream on YouTube is the toggle enable/disable a broadcast on YouTube.

To get the RTMP server address and channel key follow the link on the YouTube Dashboard and get the key and YouTube broadcast address. On the Position tab you can change the location of the participants for recording as you want or leave the layout in auto mode.

Manual tab allows you to change:

Manual
  • "Resolution" is the resolution when broadcasting;
  • "Bandwidth" is the broadcast bandwidth;
  • "Format" is the setting for broadcasts to rtmp of the server you should select flv, for rtsp - rtsp, for udp - mpegts;
  • "Output URL" is the string in which you can specify a receiving server address.

Layout tab allows you to change the way to organize it is “Use the selected layout of the conference” without affecting the conference layout, or leave the automatic distribution of participants then need to use “Use the general layout of the conference”.

The list of available layouts is found in Appendix 1 of this manual.

End time of the conference

The end time of the conference is set at the planning stage of the conference start or during the conference. To change the time of the end of the conference you need to click on the Will finish on [Date], [Time] tab.

End conference window

Specify a new date and time of ending the current conference in the modal window. Click the "Edit" button.

Accounts list and DTMF

The accounts list is divided into a list settings menu in which you can add a participant and change the display quantity of participants. You can also set a filtering of participants by their statuses and change list display mode. Changed settings are displayed in real time.

Participants list

The context menu is also available in this list when you click on a conference participant. From this menu you can perform the following actions when a participant is inactive:

Accounts List DTMF
  • The choosing of the "Call" item of the list call the participant of the conference.
  • "Send invitation" to the participant.
  • "Delete" - the selecting this functionality delete the conference participant;
  • Participant settings are available with click on his avatar.

All settings in this modal window will be correct for this participant only in this conference except for the settings of codecs and connection modes (items 5,6,7,8).

1. "Watermark" is the function for edition of the current signature of the participant. To change the signature display, use the minus symbol.

Here are some examples:

  • If you write “-” (minus) in the "Watermark" field then the selected participant’s signature will disappear on the layout and in the list of participants and the signatures of the other participants will remain unchanged;
  • when you specify “-” (minus, space) in front of the name of the selected participant the signature on the layout will disappear but will remain in the list of participants;
  • another usage scenario together with the titres function which is enabled in the conference settings. We will display the first name, last name and position but the position will be displayed only at the moment the titres appear. To do this we indicate “-” (space minus space) between the last name and position.

2. "Bandwidth" button allows you to choose bandwidth for the participant.

3. "Resolution" button allows you to choose a maximum resolution for the participant.

4. "FPS" is the number of frames per second;

5. "Codecs" is the codecs available for selection;

6. "H.264 High Profile" is the switch that allows you to use this standard when transmitting video;

7. Sending content in the main stream is the functionality for accounts who do not support H.239;

8. "Connect media streams before answer" is a switch for the server and terminal to transmit information about the codecs used before the account picks up the phone;

9. "AGC - Automatic Gain Control" is the automatic sound gain control performed on the server side;

10. "Play DTMF" is the field where you can edit before calling the participant to the conference the next parameters: dialing format ppp1234 #, where p is the delay before dialing DTMF, after going off-hook, equal to 1s.

11. "Play DTMF to everyone" is the switch for sending DTMF signal to all participants;

12. "Don't show participant in layout" is the switch that allows this account not to be displayed in automatic positions when creating a participant layout;

13. "Allow to send a presentation" is the switch that allows the moderator to control the start or end of the presentation to the participant;

14. "Sound volume to participant" and "Sound volume from participant" is the settings that set volume levels for this participant.

"Layout" is the tab where you can edit the participant layout.

When the participant status is active:

Conference management Participant list active
  • "Disconnect" is the feature that allows you to disconnect a participant from an ongoing conference and the participant becomes inactive;
  • "Mute" is the button that disconnects the outgoing audio stream from the participant;
  • "Appoint lecturer" is the button that assigns this participant as a Lecturer and encloses his video with a yellow border;
  • "Disable camera" is the button that turns off the outgoing video stream from the participant;
  • "Do not show the participant in the layout" is the setting that allow you to participate in the conference without displaying it in the layout;
  • "Disable audio" is the button that turns off the incoming audio stream from the participant;
  • "Disable video" is the button turns off the incoming audio stream from the participant;
  • "Show participant" is the button that displays the participant's video stream to a position previously reserved for him on the mosaic layout;
  • "Send message" is the button that opens a window for sending messages to selected participant;
  • "Show screenshot" “Show/Hide screenshot” is the button that displays a screenshot of the video stream from this participant and places it to the left of the participant’s name;
  • Show as presentation is the button that displays the incoming video stream from the participant on the screen as a presentation;
  • Move the ability to move a participant in this conference to any other active conference by selecting him from the drop-down list in the modal window;
  • “Send DTMF” is the button that opens a modal window with which you can send DTMF signals to the participant;
  • “Show the titer” is the button when pressed it the titer is displayed on the participant;
  • “Make a spectator” is the setting that allows you to make a conference participant a spectator and vice versa (detailed description of the functionality is given in the article "Spectators" functionality”);
  • Pressing the Properties button brings up the window with technical information about the participant such as his camera resolution, video codec, audio codec, FPS, RATE, H.239, fpsDV, rateDV, loss, JB and allows you to change the sound volume to and from the participant in the "Parameters" tab.
participant settings Details

Managing of a group of participants

Панель Обратные д-я

It is possible to manage the settings of a group of participants. If you select one or more participants from the list a group control panel will appear with the following buttons:

  • “Enable” - clicking this button adds the selected participants (one or more) to the conference;
  • “Turn on microphone” - the button to turn on the microphone for one or more participants;
  • “Turn on camera” - the button to turn on the camera for one or more participants;
  • “Turn on sound” - the button to turn on the sound of one or more participants;
  • “Enable video” - the button to enable video for one or more participants;
  • “Show/Hide screenshot” - the button for displaying a screenshot for one or more participants.

If you activate the "Reverse actions" switch then all the listed buttons will acquire reverse functionality; the action will be performed with the selected participants.

In this list the statuses of participants are displayed as follows:

  • in the form of tiles when you hover over a connected participant;
Статус участника 1.1

The image of a closed padlock indicates that RTP traffic is being encrypted.

  • statuses are constantly displayed in the form of lines; in this form, additional connection parameters can be displayed, such as losses, the number of transmitted frames in video streams, the current bitrate of video streams, etc. when you turn on the "Additional information" item;
Статус участника 1.2
  • in the form of a short list displaying the participant’s IP address and registration status on the server is available.
Статус участника 1.3

Participant connection statuses

Standard statuses display the following participant connection information:

  • light green color - the participant is connected;
  • the line colored dark green is the participant who is giving the presentation;
  • current lecturer – the line is highlighted in light blue among connected participants;
  • yellow color means that the participant is watching the webcast, as well as a word request;
  • the gray line is a participant added to the conference but not connected;
  • black color means that the participant’s microphone is muted;
Статус участника 1.4
  • Participant connection time;
Статус участника 1.5
  • Video resolution for connecting a conference participant to the server: the arrow in front of the value indicates the direction of the stream; if a dash appears instead of the value then there is no video stream. The remaining statuses are constructed in a similar way;
  • Video codecs used to connect the conference participants;
  • Audio codecs used to connect the conference participant;
Статус участника 1.4

Extended statuses display the following participant connection information:

  • The number of frames per second in the participant’s video streams;
  • The current value of bandwidth occupied by the main video data stream;
  • Forward error correction - recovery of lost packets;
  • Overhead is the additional traffic that contains duplicate packets with the help of which recovery will occur if any packets are lost;
  • Status of receiving/sending content stream via H.239, BFCP protocols;
  • Number of frames per second in a video content stream using H.239, BFCP protocols;
Статус участника 1.9
  • The current value of bandwidth occupied by the additional video stream for transmitting content via the H.239 and BFCP protocols;
  • The number of lost packets and the total percentage of losses at the current time in the transmission of video streams of the participant;
Статус участника 1.10
  • The value of the server's adaptive jitter buffer for a specific participant is measured in milliseconds and reflects the state of the data transmission channel from the participant to the server; the higher this indicator the greater the video delay for this participant;
  • Participant connection server if cascading is used.
Статус участника 1.11
  • Information about incoming and outgoing audio channels.
1.12

Losses indicator

The loss indicator displays incoming and outgoing losses. For each direction the total number of packets lost and the instantaneous packet loss as a percentage are shown.

You can determine the presence and amount of network packet losses of individual connections to a video conferencing session in “Conference management”. To do this you need to select an expanded display of participants in the conference and turn on the "Additional information" switch.

Индикация потерь

Information about losses on the connection side (server and client) is exchanged via the RTCP protocol (https://datatracker.ietf.org/doc/html/rfc3550#section-6 ) sending to each other Receiver Report (RR) (https://datatracker.ietf.org/doc/html/rfc3550#section-12.1) once every 2-3 seconds which contains the following parameters:

Cumulative number of packets lost - the total number of lost packets is counted from the moment the participant connects to the server.
Fraction lost - the fraction of packets lost calculated over the time since the previous RR was sent.

Screenshot from Wireshark with a dump of SIP connection network traffic and an applied filter to display only RTCP protocol packets:

Индикация потерь 2

These are the values ​​that are displayed on the loss indicator for each connection:

Индикация потерь 3

The indicator displays separately incoming (1) and outgoing (2) losses.

Индикация потерь 4

Information is recalculated when each RR is received or sent: incoming losses (in) are counted by the server and outgoing losses (out) are counted by the client.