Web interface for configuration and management: различия между версиями
Материал из База знаний VINTEO
Alina (обсуждение | вклад) |
Alina (обсуждение | вклад) |
||
Строка 20: | Строка 20: | ||
*Click on the Add Gateway button in the upper right corner | *Click on the Add Gateway button in the upper right corner | ||
*Fill in the required parameters | *Fill in the required parameters | ||
+ | '''Basic tab''' | ||
+ | [[Файл:Система (Основные настройки сервера) — База знаний VINTEO Gateway 2.jpg|800px|безрамки|центр|Gateway 2]]<br> | ||
+ | |||
+ | *Type is the choice of the protocol for connecting to the gateway | ||
+ | *In the Name line enter a name consisting of Latin or digits | ||
+ | *In the IP string enter enter an IPv4 address | ||
+ | *In the Registration string enter a name and a password if you need | ||
+ | *The Accept Incoming switch enables/disables the ability to receive incoming calls from this gateway. |
Версия 18:10, 3 августа 2020
English / General Description / Web interface for configuration and management
VINTEO Server allows you to choose from various basic and minor settings. The transition to these settings is made from this section of the menu.
Status
English / General Description / Status
On this page you can view basic information about the server's space and used hard disk system time server uptime H.323 gatekeeper status backup status and current firmware version.
Gateways
English / General Description / Gateways
Gateways are network connections using SIP or H.323 protocols as well as digital PBXs, PBX servers and other media servers.
This page allows you to view all gateways added to the server.
Adding a gateway
To add a gateway to the server you need
- Choose Gateways from the System drop-down list and the page will open
- Click on the Add Gateway button in the upper right corner
- Fill in the required parameters
Basic tab
- Type is the choice of the protocol for connecting to the gateway
- In the Name line enter a name consisting of Latin or digits
- In the IP string enter enter an IPv4 address
- In the Registration string enter a name and a password if you need
- The Accept Incoming switch enables/disables the ability to receive incoming calls from this gateway.