Video conference terminal web interface - История изменений

Alina в 10:19, 17 сентября 2020

2020-09-17T10:19:41Z

Alina в 09:57, 17 сентября 2020

2020-09-17T09:57:44Z

Alina в 09:55, 17 сентября 2020

2020-09-17T09:55:00Z

Alina в 09:11, 17 сентября 2020

2020-09-17T09:11:05Z

Alina в 09:06, 17 сентября 2020

2020-09-17T09:06:52Z

Alina в 09:02, 17 сентября 2020

2020-09-17T09:02:11Z

Alina в 08:49, 17 сентября 2020

2020-09-17T08:49:12Z

Alina в 08:27, 17 сентября 2020

2020-09-17T08:27:30Z

Alina в 08:19, 17 сентября 2020

2020-09-17T08:19:07Z

Alina в 08:14, 17 сентября 2020

2020-09-17T08:14:21Z

@@ Строка 235: / Строка 235: @@
 remaining tabs allow you to reboot and shutdown the power of the terminal.
-=== Licenses ===
+== Licenses ==
 The special software of the video conference terminal is distributed under the license. On the Licenses page you can install the  license of the terminal, view previously installed licenses and quantity of licenses available for a new participants connection.

← Предыдущая		Версия 09:57, 17 сентября 2020
Строка 261:		Строка 261:

	'''Before updating switch off from the terminal all USB flash drivers.'''		'''Before updating switch off from the terminal all USB flash drivers.'''
		+	[[Файл:Vinteo Update Terminal.jpg\|800px\|безрамки\|центр\|Update]]

← Предыдущая		Версия 09:55, 17 сентября 2020
Строка 246:		Строка 246:
	'''The participant connection with video stream more than 30 frames per second will take 2x more HD licenses than this requires for connection with the same resolution and frequency before 30 frames per second.'''		'''The participant connection with video stream more than 30 frames per second will take 2x more HD licenses than this requires for connection with the same resolution and frequency before 30 frames per second.'''
	[[Файл:Licenses - Vinteo Terminal31.jpg\|800px\|безрамки\|центр\|Terminal31]]		[[Файл:Licenses - Vinteo Terminal31.jpg\|800px\|безрамки\|центр\|Terminal31]]
		+	=== License installation ===
		+	To install the license you need:
		+	*request the quantity of license which you need;
		+	*provide the unique installation ID;
		+	*enter the code in the Activation code field;
		+	*click the <font color = 'green'>Activate</font> button.
		+	In the Current license block is displayed the quantity HD and FullHD licenses.
		+
		+	=== Update ===
		+	This page allows you to install firmware update. To install the file you need:
		+	*click the <font color = 'green'>Choose file</font> button;
		+	*choose the update file;
		+	*click the <font color = 'green'>Upload</font> button.
		+
		+	'''Before updating switch off from the terminal all USB flash drivers.'''

← Предыдущая		Версия 09:11, 17 сентября 2020
Строка 239:		Строка 239:

	''One HD type license allows you to connect participants with different resolutions. One HD license allows you to connect participants at different resolutions. It will be shown below how licenses can be spent.''		''One HD type license allows you to connect participants with different resolutions. One HD license allows you to connect participants at different resolutions. It will be shown below how licenses can be spent.''
		+	SD (576p / 30) audio and video connection will take 0.5HD license.
		+	*The connection more than 576p / 30 and less than or equal to 720p / 30 will take a 1HD license.
		+	подключение больше 720р/30 и меньше или равно 1080р/30 займет 2,5HD лицензии;
		+	*The connection more than 720p/30 and less or equal 1080p/30 will take 2,5HD licenses.
		+
		+	'''The participant connection with video stream more than 30 frames per second will take 2x more HD licenses than this requires for connection with the same resolution and frequency before 30 frames per second.'''
		+	[[Файл:Licenses - Vinteo Terminal31.jpg\|800px\|безрамки\|центр\|Terminal31]]

← Предыдущая		Версия 09:06, 17 сентября 2020
Строка 231:		Строка 231:
	*Logs utility logs a call for diagnostic problems when making a call.		*Logs utility logs a call for diagnostic problems when making a call.
	[[Файл:Settings - Vinteo Terminal31.jpg\|800px\|безрамки\|центр\|Terminal31]]		[[Файл:Settings - Vinteo Terminal31.jpg\|800px\|безрамки\|центр\|Terminal31]]
		+
		+	=== Power management ===
		+	2 remaining tabs allow you to reboot and shutdown the power of the terminal.
		+
		+	=== Licenses ===
		+	The special software of the video conference terminal is distributed under the license. On the Licenses page you can install the license of the terminal, view previously installed licenses and quantity of licenses available for a new participants connection.
		+
		+	''One HD type license allows you to connect participants with different resolutions. One HD license allows you to connect participants at different resolutions. It will be shown below how licenses can be spent.''

← Предыдущая		Версия 09:02, 17 сентября 2020
Строка 213:		Строка 213:
	Registration H.323 tab serves for the connection parameters setting to the H.323 server’s IP address, authorization and using codecs.		Registration H.323 tab serves for the connection parameters setting to the H.323 server’s IP address, authorization and using codecs.
	[[Файл:Settings - Vinteo Terminal27.jpg\|800px\|безрамки\|центр\|Terminal27]]		[[Файл:Settings - Vinteo Terminal27.jpg\|800px\|безрамки\|центр\|Terminal27]]
		+	'''As with SIP settings to register the terminal using only the terminal IP address. If the settings provide for authorization, you must enter the username and password in the appropriate strings.'''
		+	It is recommended to use the next codecs settings.
		+	[[Файл:Settings - Vinteo Terminal28.jpg\|800px\|безрамки\|центр\|Terminal28]]
		+
		+	=== Screensaver ===
		+	Images that are downloaded will be shown on the screen in the Screensaver tab while the terminal is in standby mode. In this tab you can configure the frequency of displaying the screensaver and enabling / disabling this function.
		+	[[Файл:Settings - Vinteo Terminal29.jpg\|800px\|безрамки\|центр\|Terminal29]]
		+	To add the screensaver you need to click the <font color = 'green'>Upload</font> button. Choose the needed image and click the <font color = 'green'>Upload</font> button.
		+	[[Файл:Settings - Vinteo Terminal30.jpg\|800px\|безрамки\|центр\|Terminal30]]
		+	In this tab you can configure the frequency of displaying the screensaver and enabling / disabling this function.
		+
		+	=== Diagnostics ===
		+	The Diagnostics tab considers common utilities for diagnostic problems about local network connection. Utilities are giving below:
		+	*Ping;
		+	*Traceroute;
		+	*Tcpdump;
		+	*Logs utility logs a call for diagnostic problems when making a call.
		+	[[Файл:Settings - Vinteo Terminal31.jpg\|800px\|безрамки\|центр\|Terminal31]]

← Предыдущая		Версия 08:49, 17 сентября 2020
Строка 202:		Строка 202:
	*<font color = 'green'>Do not disturb</font> mode;		*<font color = 'green'>Do not disturb</font> mode;
	*enable SIP and H.323.		*enable SIP and H.323.
		+	[[Файл:Settings - Vinteo Terminal25.jpg\|800px\|безрамки\|центр\|Terminal25]]
		+	=== SIP registration ===
		+	Registration SIP tab serves for the connection parameters setting to the SIP server’s IP address, authorization and using codecs.
		+	'''To register the terminal using only the terminal IP address. If the settings provide for authorization, you must enter the username and password in the appropriate strings. You can choose TCP protocol or UDP protocol the call will be carried out.'''
		+
		+	It is recommended to use the next codecs settings and data transfer protocol.
		+	[[Файл:Settings - Vinteo Terminal26.jpg\|800px\|безрамки\|центр\|Terminal26]]
		+
		+	=== H.323 registration ===
		+	Registration H.323 tab serves for the connection parameters setting to the H.323 server’s IP address, authorization and using codecs.
		+	[[Файл:Settings - Vinteo Terminal27.jpg\|800px\|безрамки\|центр\|Terminal27]]

← Предыдущая		Версия 08:27, 17 сентября 2020
Строка 176:		Строка 176:
	*If you have selected any codecs they will be applied. For example, if you have selected only audio codecs then the video stream will not be processed.		*If you have selected any codecs they will be applied. For example, if you have selected only audio codecs then the video stream will not be processed.

−	Be careful when choosing codecs. If you want to use the default codecs, clear the field on the right.	+	Be careful when choosing codecs. If you want to use the default codecs clear the field on the right.
		+	[[Файл:Settings - Vinteo Terminal24.jpg\|800px\|безрамки\|центр\|Terminal24]]
		+	=== Terminal ===
		+	In the Terminal tab you can change the information about the terminal such as:
		+	*the name of the kit;
		+	*location;
		+	*default protocol;
		+	*resolution;
		+	*bandwidth;
		+	*FPS (frame frequency);
		+	*bandwidth mode;
		+	*maximum call duration;
		+	*monitors and their resolutions;
		+	*time to standby;
		+	*cameras and their resolutions;
		+	*possibility of choice of cameras roles;
		+	*turning on/off the auto answer;
		+	*auto answer time;
		+	*turning off the microphone when auto answer;
		+	*playback device;
		+	*recorder device;
		+	*enable echo cancellation;
		+	*ringtone turning on/off;
		+	*sound check button;
		+	*<font color = 'green'>Do not disturb</font> mode;
		+	*enable SIP and H.323.

← Предыдущая		Версия 08:19, 17 сентября 2020
Строка 168:		Строка 168:
	*Enter IP address.		*Enter IP address.
	*Click the <font color = 'green'>Save</font> button.		*Click the <font color = 'green'>Save</font> button.
		+	[[Файл:Settings - Vinteo Terminal23.jpg\|800px\|безрамки\|центр\|Terminal23]]
		+
		+	=== Codecs ===
		+	Codecs is the tab with lists of audio and video codecs supported by the account's device. The list on the left contains codecs which are available for use. On the right - the selected codecs for connection.
		+
		+	*If the field is empty, the default codecs in the database are used.
		+	*If you have selected any codecs they will be applied. For example, if you have selected only audio codecs then the video stream will not be processed.
		+
		+	Be careful when choosing codecs. If you want to use the default codecs, clear the field on the right.

@@ Строка 157: / Строка 157: @@
 The NAT tab allows you to configure the device if the device is located behind NAT. To do it specify the external IP address of the upstream device, local networks, assign the port range for the RTP protocol.
 [[Файл:Settings - Vinteo Terminal22.jpg|800px|безрамки|центр|Terminal22]]
-Enter the external address of the network device in the External IP field. Enter all subnet addresses that do not require external IP substitution in the Local networks field.
+Enter the external address of the network device in the External IP field. Enter all subnet addresses that do not require external IP substitution in the <font color = 'green'>Local networks</font> field.
   It is necessary to forward the SIP, H.323 ports and the RTP port range in the NAT configuration on the network device.