Home page of the main interface - История изменений

Alina: /* Presets */

2024-09-02T11:18:25Z

Presets

Alina: /* Presets */

2024-09-02T11:18:08Z

Presets

Alina: /* Camera */

2024-09-02T11:15:33Z

Camera

Alina: /* Call history */

2024-09-02T11:11:14Z

Call history

Alina: /* Speed */

2024-09-02T11:08:59Z

Speed

Alina: /* Protocol */

2024-09-02T10:52:44Z

Protocol

Alina: /* Outgoing call */

2024-09-02T10:50:08Z

Outgoing call

Alina: /* Outgoing call */

2024-09-02T10:42:19Z

Outgoing call

Alina в 10:41, 2 сентября 2024

2024-09-02T10:41:28Z

Alina в 10:39, 2 сентября 2024

2024-09-02T10:39:24Z

@@ Строка 105: / Строка 105: @@
 . change the camera position using the control buttons:
 * camera direction – "Up" (4); “Right” (5); “Left” (6); "Down" (7);
 * camera zoom – “Zoom in"” (17), “Move away” (18).

← Предыдущая		Версия 11:18, 2 сентября 2024
Строка 100:		Строка 100:

	Camera and preset control mode (PTZ camera only)		Camera and preset control mode (PTZ camera only)
		+	[[Файл:GUI Terminal 11.jpg\|800px\|безрамки\|центр\|GUI Terminal 11]]
		+	For the camera and presets control:
		+	1. press the “OK” control button on the main page of the interface (19) in the camera window [Рисунок 11]. The diagram of the control panel buttons is displayed in the lower left corner of the screen and an image from the capture device is shown in the background. [Рисунок 12];
		+
		+	2. change the camera position using the control buttons:
		+	* camera direction – "Up" (4); “Right” (5); “Left” (6); "Down" (7);
		+	* camera zoom – “Zoom in"” (17), “Move away” (18).
		+	* loading or saving a preset – “Numbers” (12) from 1 to 6 inclusively:
		+	**short press – the loading a previously saved preset;
		+	**long press – the saving the current camera position to a preset; The message “Preset saved” is displayed.

← Предыдущая		Версия 11:15, 2 сентября 2024
Строка 70:		Строка 70:
	Field for outputting video signal from a connected camera or other capture device.		Field for outputting video signal from a connected camera or other capture device.
	[[Файл:GUI Terminal 9.jpg\|800px\|безрамки\|центр\|GUI Terminal 9]]		[[Файл:GUI Terminal 9.jpg\|800px\|безрамки\|центр\|GUI Terminal 9]]
		+
		+	==== Camera window ====
		+	[[Файл:GUI Terminal 10.jpg\|800px\|безрамки\|центр\|GUI Terminal 10]]
		+
		+	When moving focus to the camera window:
		+	* there is a white frame around the camera window;
		+	* in the camera window there is the inscription: “Press ☉ for the camera control”.
		+
		+	Entering camera control mode:
		+	* control button is OK (19).
		+
		+	Exit control mode (the camera position which was changed will be saved):
		+	* control button is “Back” (8);
		+	* control button is OK (19).
		+
		+	==== Presets ====
		+
		+	Six presets for loading and saving camera position.
		+
		+	When moving focus to any preset:
		+	* the selected preset is highlighted in color;
		+	* there is the inscription in the camera window: “Press ☉ for changing the preset”.
		+
		+	Entering camera control mode to load and change the selected preset:
		+	* OK control button (19) – the camera position will change after loading the selected preset.
		+	Exit control mode (the camera position which was changed will be saved):
		+	* “Back” control button (8) – without changing the current preset;
		+	* “ОК” control button (19) – with changing the current preset.
		+
		+	Camera and preset control mode (PTZ camera only)

← Предыдущая		Версия 11:11, 2 сентября 2024
Строка 65:		Строка 65:
	==== All call history ====		==== All call history ====
	A link to the “History” item in the "Calls" menu.		A link to the “History” item in the "Calls" menu.
		+
		+	=== Camera ===
		+
		+	Field for outputting video signal from a connected camera or other capture device.
		+	[[Файл:GUI Terminal 9.jpg\|800px\|безрамки\|центр\|GUI Terminal 9]]

← Предыдущая		Версия 11:08, 2 сентября 2024
Строка 45:		Строка 45:
	=== Speed ===		=== Speed ===
	[[Файл:GUI Terminal 7.jpg\|800px\|безрамки\|центр\|GUI Terminal 7]]		[[Файл:GUI Terminal 7.jpg\|800px\|безрамки\|центр\|GUI Terminal 7]]
		+	The “Speed” option allows to select the outgoing call bitrate in a drop-down list.
		+
		+	The default is "Auto".
		+
		+	To switch the bitrate:
		+	# move the focus to the "Speed" option;
		+	# open the list with the “OK” button (19);
		+	# select the required line;
		+	# confirm with the “OK” button (19).
		+	To exit without saving press "Return" (8).
		+	=== Call history ===
		+	[[Файл:GUI Terminal 8.jpg\|800px\|безрамки\|центр\|GUI Terminal 8]]
		+
		+	==== Recent calls ====
		+	The list consists of the five most recent calls (incoming, outcoming, missed). To make a call, move the focus to any line and press "Call" (11).
		+
		+	Pressing “OK” (19) will move the focus to the number entry field to change it. The "Outgoing call" module will display a call number and a protocol if you make a call from a history.
		+
		+	==== All call history ====
		+	A link to the “History” item in the "Calls" menu.

← Предыдущая		Версия 10:52, 2 сентября 2024
Строка 43:		Строка 43:
	# confirm with "OK" (19);		# confirm with "OK" (19);
	# exit without saving is for the "Return" button (8).		# exit without saving is for the "Return" button (8).
		+	=== Speed ===
		+	[[Файл:GUI Terminal 7.jpg\|800px\|безрамки\|центр\|GUI Terminal 7]]

← Предыдущая		Версия 10:50, 2 сентября 2024
Строка 34:		Строка 34:
	[[Файл:GUI Terminal 5.jpg\|800px\|безрамки\|центр\|GUI Terminal 5]]		[[Файл:GUI Terminal 5.jpg\|800px\|безрамки\|центр\|GUI Terminal 5]]
	=== Protocol ===		=== Protocol ===
		+	[[Файл:GUI Terminal 6.jpg\|800px\|безрамки\|центр\|GUI Terminal 6]]
		+	You can select the outgoing call protocol in a drop-down list. The default is "Auto".
		+
		+	To select it do the following:
		+	# move the focus to the "Protocol" option;
		+	# press "OK" (19) to open the list;
		+	# move the focus to the required line;
		+	# confirm with "OK" (19);
		+	# exit without saving is for the "Return" button (8).

← Предыдущая		Версия 10:42, 2 сентября 2024
Строка 33:		Строка 33:
	In edit mode, the module window with keypad and speed dial from the address book (the “Found” widget on the left). Move focus with navigation buttons (4, 5, 6, 7), use “OK” (19) to select a character. Exit is by the "Return" (8) button on a remote control or the "Ok" button on the keypad.		In edit mode, the module window with keypad and speed dial from the address book (the “Found” widget on the left). Move focus with navigation buttons (4, 5, 6, 7), use “OK” (19) to select a character. Exit is by the "Return" (8) button on a remote control or the "Ok" button on the keypad.
	[[Файл:GUI Terminal 5.jpg\|800px\|безрамки\|центр\|GUI Terminal 5]]		[[Файл:GUI Terminal 5.jpg\|800px\|безрамки\|центр\|GUI Terminal 5]]
		+	=== Protocol ===

← Предыдущая		Версия 10:41, 2 сентября 2024
Строка 30:		Строка 30:
	* input mode, which is set by default. The field is framed white after focusing on it. It is only possible to type and delete characters one by one;		* input mode, which is set by default. The field is framed white after focusing on it. It is only possible to type and delete characters one by one;
	* edit mode is set by pressing the OK button (19) in the line.		* edit mode is set by pressing the OK button (19) in the line.
		+
		+	In edit mode, the module window with keypad and speed dial from the address book (the “Found” widget on the left). Move focus with navigation buttons (4, 5, 6, 7), use “OK” (19) to select a character. Exit is by the "Return" (8) button on a remote control or the "Ok" button on the keypad.
		+	[[Файл:GUI Terminal 5.jpg\|800px\|безрамки\|центр\|GUI Terminal 5]]

← Предыдущая		Версия 10:39, 2 сентября 2024
Строка 21:		Строка 21:
	=== The “Enter number” field ===		=== The “Enter number” field ===
	[[Файл:GUI Terminal 4.jpg\|800px\|безрамки\|центр\|GUI Terminal 4]]		[[Файл:GUI Terminal 4.jpg\|800px\|безрамки\|центр\|GUI Terminal 4]]
		+	Enter an account number or conference number of the server in this field (e.g.: 10.0.0.1, 1000@10.0.0.100, 1000@test.com). You can enter the number without focusing on the line.
		+
		+	Use the “Call” button (11) to make an outgoing call to the entered number. Focus on the line is not required. To enter letters, press the "Number" buttons (12) repeatedly to cycle through the letters.
		+
		+	Characters are deleted by pressing the Backspace (10).
		+
		+	The "Enter number" field has two modes:
		+	* input mode, which is set by default. The field is framed white after focusing on it. It is only possible to type and delete characters one by one;
		+	* edit mode is set by pressing the OK button (19) in the line.