Просмотр кода страницы Vinteo Server Installation Manual

[[ English ]] / Vinteo Server Installation Manual
== Requirements of Software and virtual environment ==
=== Software required to start the installation process ===
Installing the Vinteo server on a virtual machine is done through the installation DVD. The ISO-image can be downloaded from
https://download.vinteo.com/VinteoServer/.<br>
=== Requirements of Hypervisor and Virtual machine Settings ===

VMware hypervisor is supported.
Minimum requirements on a virtual machine for installing a Vinteo server:

*Processor (vCPU) - 4 cores (with support for AVX2, with a frequency of 2.2 GHz and higher)
*RAM - 4 gigabytes
*Network adapter - e1000
*HDD - SCSI or SATA or IDE volume above 20 GB<br>
=== Installation process from the ISO image ===
==== Initial boot process ====
Create the virtual machine. Boot it from the downloaded vinteo-server.iso image.  The screen with VCS "VINTEO" sign will appear on the screen.
[[Файл:Vinteo Server 1.jpg|800px|безрамки|центр|Vinteo Server 1]]

==== Installer Welcome Screen ====
Wait for the installer to load. The welcome window with the hardware requirements and default network settings information will be displayed on the screen. Read the information and click Next.
[[Файл:Vinteo Server Setup 2.jpg|800px|безрамки|центр|Vinteo Server Setup 2]]

==== License agreement ====
The window with the text of the license agreement will be displayed. Using the TAB key navigate to right button. Click the Accept License button/“Принять лицензию” to continue the installation.

==== Choosing the drive to install ====
You have to select the drive to install the system. If there are several disks select one and click Next.
[[Файл:Vinteo Server Setup 3.jpg|800px|безрамки|центр|Vinteo Server Setup 3]]
==== Data Overwrite Warning ====
All data on the selected drive will be destroyed and overwritten during installation. Read the warning on this and click “Yes”/“Да”(left button) to continue the installation. 
[[Файл:Vinteo Server Setup 4.jpg|800px|безрамки|центр|Vinteo Server Setup 4]]
==== Data copying process ====
The installation process will start. Data will be copied. You can watch the progress bar. 
[[Файл:Vinteo Server Setup 5.jpg|800px|безрамки|центр|Vinteo Server Setup 5]]
==== Completing the copy process and rebooting ====
After the process of copying data is completed the window appears with information about the network default settings. 
Disconnect the installation ISO image from the virtual machine to boot from the HDD.  Click Reload/”Перезагрузить” button.
[[Файл:Vinteo Server Setup 6.jpg|800px|безрамки|центр|Vinteo Server Setup 6]]
==== Initial loading and initialization of the Vinteo server ====
Wait for the end of the installation and initializing the of the system.<br>
 
'''Attention! The server will automatically restart 2 times during this process.'''
[[Файл:Vinteo Server Setup 7.jpg|800px|безрамки|центр|Vinteo Server Setup 7]]

=== Getting started with the Vinteo server ===
==== The Server console ====
The standard state of the Server console in its working state is a command line of the form: 
 #>_
Vinteo server has no GUI. Setup is done through the web-based interface. 

The list of the available commands is displayed using the “help” command.
==== Network Defaults ====
IP address 10.0.0.10 with mask 255.255.255.0 is set on the eth0 network interface by default.<br>

To change the IP address use the st defult intrfce command. After entering this command a dialog will be started:<br>
 #intname >  type the name eth0 press Enter
 #ipaddr > type the desired address and press Enter
 #mask > type the mask in the format 255.255.255.0 and press Enter
 #gw > (type the IP address of the gateway and press Enter)

The summary of the eth0 interface configuration and the current routing table will be displayed on the screen.<br>

'''Attention! The IP address setted up this way will not be saved after the server reboots. It is necessary to set up it through the Web-based management interface in section System -> Settings -> Network Interface Settings.'''
==== The Initial Login to the Web-based Server Management Interface ====
The default self-signed certificate is installed on the system. Therefore the browser will display a security warning when connecting through https to the default server address or to the address assigned in the console. Just ignore this warning and proceed with the page.
[[Файл:Vinteo Server Setup 8.jpg|800px|безрамки|центр|Vinteo Server Setup 8]]
==== Default Admin Credentials ====
Log in to the system at the “Sign in” tab with default login “admin” and the password “123”.